User’s Manual

Chapter 3: Installation options3-2
3.1 Installing friction rail kit items
Your friction rail kit package contains:
• Two pairs of rack rails (for the rack)
• Nut-and-bolt type screws and one pair of server latches
Nuts and screws Front rack rails Rear rack rails
3.1.1 Attachingthexinglatchestotheserver
Refer to the gures below for the locations to attach the two xing latches to the
two sides of the server with four screws.
1. Remove the two screws on the side of the server chassis.
2. Secure the xing latch with the two screws you removed in step 1.
3. Repeat step 1 to 2 to secure another xing latch to the other side of the
server.
2
1