User Manual

4-36
Chapter 4: BIOS Setup
4.10 Event Logs menu
The Event Logs menu items allow you to change the event log settings and view the system
event logs.
4.10.1 Change Smbios Event Log Settings
Press <Enter> to change the Smbios Event Log configuration.
All values changed here do not take effect until computer is restarted.
Smbios Event Log [Enabled]
Change this to enable or disable all features of Smbios Event Logging during boot.
Configuration options: [Disabled] [Enabled]
The following item appears only when Smbios Event Log is set to [Enabled].
Erase Event Log [No]
Choose options for erasing Smbios Event Log. Erasing is done prior to any logging
activation during reset.
Configuration options: [No] [Yes, Next reset] [Yes, Every reset]
When Log is Full [Do Nothing]
Choose options for reactions to a full Smbios Event Log.
Configuration options: [Do Nothing] [Erase Immediately]
Log EFI Status Code [Enabled]
This option allows you to enable or disable logging of the EFI Status Codes.
Configuration options: [Disabled] [Enabled]
The following item appears only when Log EFI Status Code is set to [Enabled].
Convert EFI Status Codes to Standard Smbios Type [Disabled]
This option allows you to enable or disable converting of EFI Status Codes to
Standard Smbios Type (Not all may be translated).
Configuration options: [Disabled] [Enabled]
4.10.2 View Smbios Event Log
Press <Enter> to view all smbios event logs.