User Manual
Table Of Contents
- Safety information
- Chapter 1: Product Introduction
- Chapter 2: Hardware Information
- Chapter 3: Motherboard Information
- Chapter 4: BIOS Setup
- 4.1 Managing and updating your BIOS
- 4.2 BIOS setup program
- 4.3 Main menu
- 4.4 Performance Tuning menu
- 4.5 Advanced menu
- 4.5.1 Trusted Computing
- 4.5.2 Redfish Host Interface Settings
- 4.5.3 AMD CBS
- 4.5.4 Onboard LAN Configuration
- 4.5.5 Serial Port Console Redirection
- 4.5.6 CPU Configuration
- 4.5.7 PCI Subsystem Settings
- 4.5.8 USB Configuration
- 4.5.9 Network Stack Configuration
- 4.5.10 NVMe Configuration
- 4.5.11 APM Configuration
- 4.5.12 AMD Mem Configuration Status
- 4.5.13 T1s Auth
- 4.5.14 Third-party UEFI driver configurations
- 4.6 Chipset menu
- 4.7 Security menu
- 4.8 Boot menu
- 4.9 Tool menu
- 4.10 Event Logs menu
- 4.11 Server Mgmt menu
- 4.12 Exit menu
- Chapter 5: Driver Installation
- Appendix
4-28
Server / Client CA Configuration
Enroll Cert
Allows you to enroll a certificate using a certificate file or manually input a certificate
GUID.
Enroll Cert Using File
Allows you to enroll a certificate using a certificate file. You will be prompted to
select a storage device and navigate to the location of the certificate file.
Cert GUID
Allows you to enroll a certificate by manually inputting the certificate GUID.
Commit Changes and Exit
Exit Server CA configuration after saving the changes.
Discard Changes and Exit
Exit Server CA configuration without saving any changes.
Delete Cert
Allows you to delete the certificate.
4.5.13 T1s Auth
Allows you to configure the Server Certificate Authority (CA).
4.5.14 Third-party UEFI driver configurations
Additonal configuration options for third-party UEFI drivers installed to the system will appear
in the section marked in red in the screenshot below.