User Guide

ASUS RS720-E8-RS24-ECP 7-5
3. Select
Yes
using the <Tab> key when asked if you have the driver disk, then press
<Enter>.
4. Insert the Red Hat
®
EnterpriseRAIDdriverdisktotheUSBoppydiskdrive,select
OK
,
then press <Enter>.
The drivers for the RAID card are installed to the system.
Red Hat
®
Enterprise Linux OS 5.x
To install the LSI MegaRAID controller driver when installing Red Hat
®
Enterprise OS:
1. BootthesystemfromtheRedHat
®
OS installation CD.
2. At the
boot:
, type
linux dd noprobe=ata1 noprobe=ata2
..., then press
<Enter>.
- To install or upgrade in graphical mode, press the <ENTER> key.
- To install or upgrade in text mode, type: linux text <ENTER>.
- Use the function keys listed below for more information.
[F1-Main] [F2-Options] [F3-General] [F4-Kernel] [F5-Rescue]
boot: linux dd noprobe=ata1 noprobe=ata2
The number of ata varies with the hard disk drive number you have when building a RAID
set. For example, if you want to build a RAID set with 6 hard disk drives, type command
line:
linux dd noprobe=ata1 noprobe=ata2 noprobe=ata3 noprobe=ata4 noprobe=ata5
noprobe=ata6
.
Main Menu
Do you have a driver disk?
Yes No
Insert Driver Disk
OK
Back
Insert your driver disk into /dev/fd0
and press “OK” to continue.