User Guide

Chapter 2: Hardware setup
2-24
2.9 Redundant power supply module
The server system can support up to 2 770W 80Plus Platinum redundant power supply
module. You can purchase and install the second redundant power supply module if there's
only one power supply module in your system.
4. Carefully insert the replacement power
supply module into the chassis.
5. Press the latch to the left (C) then push
the power supply module in place (D).
C
D
Ensure to remove the protection cap before installation.
1. Press the latch to the left (A).
2. Remove the metal cover from the
chassis (B).
A
B
Install the second redundant power supply module
To install a redundant power supply module:
3. Get the second redundant power supply
module.
• Ensure that the system is turned off before removing any components.
• Touch any metal surface to release static electricity.
• Use power supply module with the same model and style.