User Guide

Chapter 2: Hardware setup
2-6
4. Gently push the left load lever down to
slightly lift the load plate (G).
Do not insert the load lever into the
retention tab.
5. Hold the edge then gently lift the load
plate (H).
The CPU ts in only one correct
orientation. DO NOT force the CPU
into the socket to prevent bending the
CPU pins on the socket.
6. Get the CPU.
7. Align and position the CPU over the
socket ensuring that the triangle mark on
the CPU matches the triangle mark on the
socket box.
8. Install the CPU into the slot.
9. Gently push the load plate just enough to
let it sit on top of the CPU.
edge of the Load plate
Load plate
Triangle mark
Do not force to close the load plate as
it may damage the CPU.