User's Manual

華碩 RS720-E7-RS24-EG 用戶手冊
4-21
Q-Code 列表
動作 相位 代碼 類型 說明
Normal
boot
Security
Phase
01 Progress First post code(POWER_ON_POST_
CODE)
02 Progress Load BSP microcode(MICROCODE_
POST_CODE)
03 Progress Set cache as ram for PEI
phase(CACHE_ENABLED_POST_
CODE)
06 Progress CPU Early init.(CPU_EARLY_INIT_
POST_CODE)
04 Progress initializes South bridge for PEI
preparation
PEI(Pre-EFI
initialization)
phase
10 Progress PEI Core Entry
15 Progress NB initialize before installed memory
19 Progress SB initialize before installed memory
78~00 Progress Wait BMC ready(duration: 120
seconds).
A1 MRC Progress QPI initialization
A3 MRC Progress QPI initialization
A7 MRC Progress QPI initialization
A8 MRC Progress QPI initialization
A9 MRC Progress QPI initialization
AA MRC Progress QPI initialization
AB MRC Progress QPI initialization
AC MRC Progress QPI initialization
AD MRC Progress QPI initialization
AE MRC Progress QPI initialization
AF MRC Progress QPI initialization Complete
2F Progress Memory Init.
B0 MRC Progress Memory Init.
B1 MRC Progress Memory Init.
AF MRC Progress RC Reset if require
B4 MRC Progress Memory Init.
B2 MRC Progress Memory Init.
B3 MRC Progress Memory Init.
B5 MRC Progress Memory Init.
B6 MRC Progress Memory Init.
B7 MRC Progress Memory Init.
B8 MRC Progress Memory Init.
B9 MRC Progress Memory Init.
BA MRC Progress Memory Init.
BB MRC Progress Memory Init.
BC MRC Progress Memory Init.
BF MRC Progress Memory Init. Done
5A MRC Progress Other config. After RC end
31 Progress Memory already installed.
32 Progress CPU Init.
34 Progress CPU Init.
36 Progress CPU Init.
4F Progress DXE Initial Program Load(IPL)
（下一頁繼續）