Manual
Table Of Contents
- About this guide
- Safety information
- Chapter 1: Product introduction
- Chapter 2: Hardware setup
- Chapter 3: Installation options
- Chapter 4: Motherboard info
- Chapter 5: BIOS setup
- 5.1 Managing and updating your BIOS
- 5.2 BIOS setup program
- 5.3 Main menu
- 5.4 Advanced menu
- 5.4.1 CPU Configuration
- 5.4.2 CPU Power Management Configuration
- 5.4.3 Chipset Configuration
- 5.4.4 PCH SATA Configuration
- 5.4.5 PCH SCU SAS Configuration
- 5.4.6 PCI Subsystem Settings
- 5.4.7 Onboard LAN Configuration
- 5.4.8 USB Configuration
- 5.4.9 Trusted Computing
- 5.4.10 ACPI Settings
- 5.4.11 WHEA Configuration
- 5.4.12 APM
- 5.4.13 Serial Port Console Redirection
- 5.4.14 ME Subsystem
- 5.4.15 Legacy Devices Configuration
- 5.4.16 Runtime Error Logging
- 5.5 Server Mgmt menu
- 5.6 Event Logs menu
- 5.7 Boot menu
- 5.8 Monitor menu
- 5.9 Security menu
- 5.10 Tool menu
- 5.11 Exit menu
- Chapter 6: RAID configuration
- Chapter 7: Driver installation
- 7.1 RAID driver installation
- 7.2 Intel® chipset device software installation
- 7.3 Intel@ Network Connections Software installation
- 7.4 VGA driver installation
- 7.5 Intel® C600 Series Chipset SCU SATA RAID Drivers
- 7.6 Intel® Rapid Storage Technology enterprise 3.0 installation
- 7.7 Intel® I350 Gigabit Adapters Driver installation
- 7.8 Management applications and utilities installation
- Appendix: Reference information

7-8 Chapter 7: Driver installation
5. When asked if you will load additional RAID controller drivers, select No, then
press <Enter>.
More Driver Disks?
Do you wish to load any more
driver disks?
Yes No
6. Follow the onscreen instructions to nish the OS installation.
7. When the installation is completed, DO NOT click
Reboot. Press <Ctrl>
+ <Alt> + <F2> to switch to the command-line interface from graphic user
interface.
8. Type the following commands when using a Legacy oppy.
mkdir /mnt/driver
mount /dev/fd0 /mnt/driver
cd /mnt/driver
sh replace_ahci.sh
reboot