Manual

6-22 Chapter 6: RAID conguration
6.2.7 Selecting the boot drive from a RAID set
You must have created a new RAID conguration before you can select the
boot drive from a RAID set. See section
5.2.1 Creating a RAID set: Using New
Conguration
for details.
To select the boot drive from a RAID set
1. From the
Management Menu
, select
Congure
>
Select Boot Drive
, and
then press <Enter>.
2. When prompted, use the arrow keys to select the bootable virtual drive from
the list, then press <Enter>.
3. The virtual drive is selected as boot drive. Press any key to continue.
Management Menu
Congure
Initialize
Objects
Rebuild
Check Consistency
Select A Boot VD
Conguration Menu
Easy Conguration
New Conguration
View/Add Conguration
Clear Conguration
Select Boot Drive
LSI Software RAID Conguration Utility Ver C.05 Sep 17, 2010
BIOS Version A.10.09231523R
Use Cursor Keys To Navigate Between Items And Press Enter To Select An Option
Management Menu
Congure
Initialize
Objects
Rebuild
Check Consistency
Select A Boot VD
Conguration Menu
Easy Conguration
New Conguration
View/Add Conguration
Clear Conguration
Select Boot Drive
Bootable VDs(1):Current Boot VD(0)
Boot Drive 0
LSI Software RAID Conguration Utility Ver C.05 Sep 17, 2010
BIOS Version A.10.09231523R
Use Cursor Keys To Navigate Between Items And Press Enter To Select An Option