Specifications
Table Of Contents
- Contents
- Revision history
- Safety information
- Chapter 1: Product introduction
- 1.1 Key features
- 1.2 System overview
- 1.3 Front panel features
- 1.4 Rear panel features
- 1.5 System specifications
- Chapter 2: Components
- 2.1 Upgrading CPU and CPU heatsink
- 2.2 Upgrading system memory
- 2.3 Upgrading hard disk drives
- 2.4 Installing ASUS PIKE RAID module
- 2.5 Installing ASUS Server Management Board
- 2.6 OS support list
ASUS RS500-E6/PS4 2-7
2.4 Installing ASUS PIKE RAID module
The ASUS PIKE RAID module allows users to create RAID function from SAS hard
disk drives connected to the SAS connectors on the motherboard.
Order P/N Description
90-C1SCM0-00UAY00Z ASUS PIKE 1064E 4-port SAS Module (Support Integrated
RAID 0, 1, 1E)
90-C1SCN5-00UAY10Z ASUS PIKE 1078 8-port SAS RAID Module (Support Hardware
RAID 0, 1, 5, 6, 10)
SATA4
SATA3
SATA2
SATA1
SAS1
SAS2
SAS3
SAS4
1
2
3
5
4
SGPIO_SEL1
SGPIO_SEL1
On-Board
12
Add-On Card
23
1. Insert the RAID card into the PIKE RAID
card slot, ensuring that it is completely
seated on the PIKE RAID card slot.
2. Remove the data cables connected to the
SATA connectors on the motherboard.
3. Connect the data cables, by numerial
order, to the SAS connectors labeled
SAS1-4 (red) on the motherboard.
4. Set the SGPIO_SEL1 jumper on the backplane to pin 2-3 when connecting
data cables to the SAS connectors on the motherboard.
5. Install the i Button*.
* PIKE 1078 module won’t function if the i Button is not installed.