User guide

2-15
ASUS RS400-E8-PS2, RS400-E8-PS2-F
3. Remove two screws on the two sides of
the support bar at the back of the drive
tray.
Supportbar
The support bar supports the drive
tray horizontally to prevent the drive
tray from benting or deforming.
SSD screw hole
SSD
Drive tray screw hole
4. Place a SSD into the tray with the screw
holesontheSSDttheonesonthe
drive tray.
 Ensuretotthefourscrewholeson
the SSD to the screw holes on the drive
tray.
4. Then secure it with four screws (2
screws on each side).