User Guide

Chapter 2: Hardware Setup
2-22
Toreinstallthesystemfans:
1. Align the system fans to the screw holes.
2. Secure the system fans to the system using the screws you removed earlier.
3. Connect the system fan cable to the fan connector on the motherboard.
Ensurethatthefansareinstalledinthecorrectdirection.ForRS200-E9-PS2,theairow
directionalarrowonthefansideshouldpointtotheinnerpartofthechassis;forRS200-
E9-PS2-F,theairowdirectionalarrowonthefansideshouldpointtotheouterpartofthe
chassis
REMOVE FAN 1
REMOVE FAN 2
REMOVE FAN 3
2. Disconnect the system fan cable from
the fan connector on the motherboard,
then lift the fan and mylar and set
them aside.