User Guide

Chapter 2: Hardware Setup
2-16
2.5.2 Installing M.2 (NGFF) cards
ToinstallanM.2card:
1. LocatetheM.2connector(NGFF1)onthemotherboard.
2. Removethescrewonthestandscrew.
3. PreparetheM.2card.
4. AlignandinserttheM.2cardintotheM.2connector(NGFF1).
5. SecuretheM.2cardwiththescrewyouremovedinstep2.
• Pleasepayattentionwhenremovingthescrew,thestandscrewmightberemoved
together with it.
• EnsurethattheM.2cardispositionedbetweenthescrewandthestandscrewbefore
securing it.
Stand screw
Screw hole
Screw
NGFF1