User Guide

Chapter 2: Hardware Setup
2-2
2.1 Chassis cover
2.1.1 Removing the rear cover
To open the chassis cover:
1. Loosen the six (6) thumbscrews on the cover with a Phillips screwdriver to release the
cover from the chassis, then lift the cover to remove the chassis cover.
• Unplugthepowercordfromthepowerconnectorbeforeremovingthecover.
• Becarefulwhenremovingthechassiscover.Whenremovinganysystemcomponent,
becarefulwiththeCPUfan,chassisfanandothersharpedgetoavoidhurtingyour
ngers.
• Theillustrationsinthischapterareforreferenceonly.Theappearancemayvary
depending on the model, but the installation steps are basically the same.