User Guide

5-22
Chapter 5: BIOS Setup
NVMe Configuration
USB transfer time-out [20 sec]
Allows you to select the USB transfer time‑out value.
Congurationoptions:[1sec][5sec][10sec][20sec]
Device reset time-out [20 sec]
Allows you to select the USB device reset time‑out value.
Congurationoptions:[10sec][20sec][30sec][40sec]
Device power-up delay [Auto]
Thisallowsyoutosetthemaximumtimethedevicewilltakebeforeitproperlyreportsitselfto
the Host Controller.
Congurationoptions:[Auto][Manual]
Onboard LAN Configuration
This allows you to enable or disable the onboard LAN.