User Guide

ASUS RS162-E4/RX4
2-29
Install the PSU and Power backplane
1. Match the screw with the screw
hole and use a screw driver to
fasten it as shown to secure the
power backplane board with the
cover.
2. Put the power backplane board
into its place as shown.
3. P u s h t h e p o w e r b a c k p l a n e
board forward as shown until a
sligt sound indicates the board
is fi r m l y c on n e c ted t o t h e
motherboard.
4. Connect the 8-pin power cable
to the rear panel SAS/SATA2
backplane board.