User Guide

Chapter 2: Hardware setup

2-20

2.6 Cable connections

Pre-connected system cables

1. PSU connectting card (connects PSU and the board)

2. Rear panel SAS/SATA2 power connector (hide under the panel,

connects to PSU

3. IDE cable port (hide under chassis, connect rear panel SAS/SATA2 to

optical drive

4. System Fan connector (connect rear panel SAS/SATA2 to system fan)

5. Bridge cards (three), (hide under the cover panel, connect the system

board to rear panel SAS/SATA2)

6. Device fan connector (rear panel SAS/SATA2 to device fan)

7. COM1 cable port (system board to COM1 openning)