User Guide

Chapter 5: BIOS setup
5-34
5.6 Security menu
Supervisor Password Is Clear
User Password Is Clear
Set Supervisor Password [Enter]
Set User Password [Enter]
Password Check [Setup]
Password Lock Mode [Disabled]
Removable Device Boot [Enabled]
Flash Wrtie [Enabled]
ItemSpecicHelp
Su p e rviso r Pa sswor d
controls access to the
setup utility.
F1
：
Help
↑↓
Select Item -
/+

Change Values F9
：
Setup Defaults
ESC
：
Exit
→←
Select Menu Enter

Select Sub-menu F10
：
Save and Exit
PhoenixBIOS SETUP UTILITY
Main Advanced Server
Security Boot Exit
Enter current password
Enter new password
Conrmnewpassword
Supervisor Password Is [Clear]
User Password Is [Clear]
These elds allow you to set passwords:
To set a password:
1. Select an item then press <Enter>.
2. Type in a password using a combination of a maximum of eight (8)
alpha-numeric characters, then press <Enter>.
3. When prompted, conrm the password by typing the exact characters
again, then press <Enter>. The password eld setting is changed to Set.
To clear the password:
1. Select the item Set Supervisor Password or Set User Password,
depending on which password you want to clear. Press <Enter>.
The following message appears: