User Guide

2-152-15

2-15

ASUS RS161-E2/PA2ASUS RS161-E2/PA2

ASUS RS161-E2/PA2

5. Install a PCI Express x16 card to

the bracket, then secure the

card with the screw you

removed earlier.

2.6.22.6.2

2.6.2

Reinstalling the riser card bracketReinstalling the riser card bracket

Reinstalling the riser card bracket

To reinstall the riser card bracket:

1. Take note of the holes on the riser card bay. The three pegs on the

riser card should match these holes to ensure that the bracket is

properly in place.

2. Install the riser card bracket

with the card into the PCI

Express x16 slot on the

motherboard.

3. Press the riser card bracket until

the golden connectors

completely fit the slot and the

bracket aligns with the rear

panel.

4. Connect the cable(s) to the card, if applicable.