User Guide

Chapter 2: Hardware setupChapter 2: Hardware setup
Chapter 2: Hardware setupChapter 2: Hardware setup
Chapter 2: Hardware setup
2-142-14
2-142-14
2-14
2.6 Expansion slot
2.6.12.6.1
2.6.12.6.1
2.6.1
Installing an expansion cardInstalling an expansion card
Installing an expansion cardInstalling an expansion card
Installing an expansion card
to the riser card bracketto the riser card bracket
to the riser card bracketto the riser card bracket
to the riser card bracket
The barebone server comes with a riser card bracket. You need to remove
the bracket if you want to install PCI Express x16 expansion cards.
To install the PCI Express x16 expansion cards:
1. Firmly hold the riser card
bracket, then pull it up to
detach it from the PCI Express
x16 slot on the motherboard.
2. Place the riser card bracket on a
flat and stable surface, then
remove the screw from the slot
bay.
3. Use a Phillips (cross) screw
driver to remove the screw that
secures the slot metal cover.
4. Remove the slot metal cover,
then set it aside.