User Guide

2-132-13

2-13

ASUS RS161-E2/PA2ASUS RS161-E2/PA2

ASUS RS161-E2/PA2

5. Carefully insert the drive tray

and push it all the way to the

depth of the bay until just a

small fraction of the tray edge

protrudes.

6. Push the tray lever until it

clicks, and secures the drive

tray in place. The drive tray is

correctly placed when its front

edge aligns with the bay edge.

7. Repeat steps 1 to 6 if you wish

to install a second SATA drive.

When installed, the SATA connector on the drive connects to the SATA

interface on the backplane.

8. Connect the bundled SATA cables to the connectors on the SATA

backplane. Refer to section “2.8 SATA backplane cabling” for

information on the SATA backplane cable connections.

SATA interfaceSATA interface

SATA interface

on the backplaneon the backplane

on the backplane