User Guide

2-32-3

2-3

ASUS RS161-E2/PA2ASUS RS161-E2/PA2

ASUS RS161-E2/PA2

2.1.22.1.2

2.1.2

Installing the coverInstalling the cover

Installing the cover

1. Position the cover on top of the chassis with the thumbscrews on the

rear, and leaving a gap of about half an inch from the front panel.

3. Slide the cover toward the front until it snaps in place.

4. Tighten the thumbscrews on the

rear to secure the cover.

2. Make sure that the side markings on the cover (two on each side) are

aligned to the grooves on the chassis.

GroovesGrooves

Grooves

Side markingsSide markings

Side markings

ThumbscrewsThumbscrews

Thumbscrews

5. Drive in the screw on both sides

of the chassis.