RS160-E2/CS3 Intel¤ Xeon¤ 1U
1) 2) Intel Xeon Pentium Windows MS-DOS Intel Microsoft ©2005 RS160-E2/CS3 V2.
.......................................................................................................... 8 .............................................................................................. 9 .......................................................................................................... 9 ........................................................................................................ 10 .................................................................... 10 1.1 1.2 .......
2.7 SCSI Channel B .............................................................................. 2-14 ............................................................................................... 2-15 ....................................................................................... 2-16 2.9.1 2.9.2 ...................................................................................... 2-16 ...................................................................................... 2-16 2.9.3 2.9.
.2.2 5.2.3 5.2.4 ...................................................................... 5-11 .......................................................................... 5-11 ...................................................................................... 5-12 5.2.5 5.2.6 .......................................................................................... 5-12 .......................................................................................... 5-12 .......................................
.2.1 6.2.2 HostRAID ............................................................ 6-3 RAID 0 .................................................................................. 6-4 6.2.3 6.2.4 RAID 1 .................................................................................. 6-7 RAID 0+1 ............................................................................ 6-10 RAID 6.2.5 6.2.6 Add hot-spare .......................................................................... 6-13 ...................
IC RS160-E2/CS3 7
UPS IC 8
RS160-E2/CS3 RS160-E2/CS3 RS160-E2/CS3 Jumper BIOS BIOS RS160-E2/CS3 BIOS 9
1. http://tw.asus.com 2.
RS160-E2/CS3
1.1 RS160-E2/CS3 1. R11 EVERCASE 1U NCL-DSR1 500W x1 x1 SCSI CPU 2. AC 3. 4. RS160-E2/CS3 support CD ASWM Computer Assoicate 5.
1.2 RS160-E2/CS3 1MB L2 LAN VGA I/O I/O 1U NCL-DSR1 ¤ Intel Xeon 3.6GHz 1U AR12 NCL-DSR1 Intel¤ E7520 Intel¤ ICH5R Intel¤ Xeon L2 1M 8 DDR II 2GB PC3200 ECC/nonECC Registered DDR 16GB Broadcom¤ BMC5721 Gigabit LAN PCI-E 1.0a 2 RJ-45 10/100/1000 Mbps ATI RAGE-XL PCI-based VGA 8MB 1 64-bit/133MHz PCI-X / 2 64-bit/100MHz PCI-X Adapter AIC-7902 PCI-X U320 SCSI U320 SCSI HostRAID RAID 0,1 0+1 SCSI Channel 3 SCSI 2 x USB 2.0 Reset Location (1 3 ) Location 2x 1 x PS/2 1 x PS/2 1x 1 x VGA 1 X SCSI 2 x USB 2.
1.3 RS160-E2/CS3 1U Intel® Xeon L2 1M 8 PC3200 DDRII ECC/non-ECC 16 GB 8MB ATI RAGE-XL VGA 800MHz Registered 2 Gigabit RS160-E2/CS3 Windows® 2000 Advance Server 2000 Server 2003 Server 2003 Enterprise Linux® Red Hat Linux Advance Server 3.0 Red Hat Linux Advance Server 3.0 (EM64T) SeSE Linux Enterprise Server 9.
1.4 RS160-E2/CS3 LED USB Location USB SCSI SCSI 1.5 RS160-E2/CS3 3 SCSI RS160-E2 11 1 2 3 4 1. 2. 3. PS/2 4. PS/2 5. USB2.0 6. COM1 RS160-E2/CS3 5 6 7 8 9 7. 8. LAN 1 Gibabit 9. LAN 2 Gigabit 10. SCSI 11.
1.6 LED LED 1.6.
1.6.
1.7 RS160-E2/CS3 CPU 4 2 3 1 5 7 11 6 14 8 9 10 12 1. 2. PCI 3. 4. 5. CPU 6. 7. 1-8 13 8. 9. 10. 11. 12. 13. 14.
RS160-E2/CS3
2.1 RS160-E2/CS3 1. 2. 3. 4. 5. 2.2 RS160-E2/CS3 2.2.1 1.
2. 3. 4. 5.
2.2.2 1. 2. 3. 4.
2.3 CPU RS160-E2/CS3 NCL-DSR1 ZIF L2 1M 604 TM Xeon Intel¤ NetBurst TM CPU 1 Intel Xeon Gold Arrow Pin A1 NCL-DSR1 ® CPU NCL-DSR1 CPU Socket 604 1. 2. CPU CPU CPU 1 2.3.1 1.
2. 3. 4.
2.3.2 CPU CPU 1. CPU CPU 1 2. 3. 4.
2.4 2.4.1 240-pin DDR2 DIMM non-ECC DDR2 400 DIMM DDR2 DDR DDR2 240 DDR DDR DDR2 DIMM Double Data Rate 2 16GB 240-pin Registered ECC/ 184 128 Pins DDR2 112 Pins DIMM_B4 NCL-DSR1 ® DIMM_A4 DIMM_B3 DIMM_A3 DIMM_B2 DIMM_A2 DIMM_B1 DIMM_A1 NCL-DSR1 240-pin DDR2 DIMM sockets 2.4.2 512MB 1GB 2GB Registered ECC/non-ECC DDR2 DIMM 1. CL CAS-Latency 2. 2GB 3. 4. 5.
2.4.3 1. DDR2 2. DDR2 3. DDR2 DDR2 DIMM 2.4.4 1. 2.
2.5 RS160-E2/CS3 SCSI 1. 2. 3 3. ( 1) ( ( 4. 3) 2) 2 1 SCSI 5. 6.
2.6 RS160-E2/CS3 PCI-X PCI-X 2.6.1 PCI-X 1. PCI-X 2. 1 2 3 PCI-X PCI-X 3. PCI-X 1 4. PCI-X 2 5.
6. PCI-X 7. 1 2 3 4 PCI-X PCI-X 8. PCI-X PCI-X 9.
2.6.2 1. BIOS BIOS 2. IRQ 3. IRQ 0 1 2 3* 4* 5* 6 7* 8 9* 10* 11* 12* 13 14* 15* 1 2 N/A 11 12 13 14 15 3 4 5 6 7 8 9 10 COM 2 COM 1 LPT 2 LPT 1 CMOS/ ACPI PCI PCI PS/2 IDE IDE * PCI IRQ ICH5 IDE Controller ICH5 SATA Controller ICH5 SMBus Controller ICH5 USB UHCI Controller #1 ICH5 USB UHCI Controller#2 ICH5 USB 2.
2.7 SCSI Channel B RS160-E2/CS3 SCSI SCSI SCSI SCSI SCSI SCSI Channel B SCSI 2.7.1 1. SCSI 2.
2.8 RS160-E2/CS3 2 3 1 5 4 6 7 16 9 8 13 10 11 14 15 12 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11. 12. 13. 14. 15. 16.
2.9 1. 2. 3. 4. 5. 2.9.1 1. 2. 3. 2.9.2 1. 2.
2.9.3 1. 2. 2 3.
2.9.4 2.9.4.1 1. 22 1 1 2. 1 2 3. 5 2 14 4.
2.9.4.2 1. 2. 5 4 3. 2 1 4.
2.9.5 2.9.5.1 1. 2.8 2. CPU DDR 3. 3. 4.
2.9.5.2 1. 2. IO 9 NCL-DS1R1 ® 3. 4. PCI-X 5. 2.7 6.
2.
2.10.1 1. 2. 1 8 3.
2-24
RS160-E2/ CS3
3.1 RS160-E2/CS3 8 80 3.2 1. 2. 3.
3.3 1. 1U 2. 1U 3. 4. 5. 6.
3.4 1. 2.
Jumper
4.1 1. 2. 3. 4. 5.
4.2 I/O NCL-DSR1 ® 4.2.
4.2.
4.3 1.
2.USB 3-pin USBPW12, USBPW34 +5V USB +5VSB S1 S3 S4 USB +5V [1-2] USBPW12 NCL-DSR1 ® 2 1 +5V (Default) USB +5VSB USBPW34 2 1 +5V (Default) NCL-DSR1 USB device wake up 1. 3 2 3 2 +5VSB +5VSB 500mA/+5VSB 2. +5VSB 3. 3.VGA WIndows 2000 Service Pack 4.
4.CPU 3-pin FM_CPU1,FM_CPU2 4-pin [1-2] CPU CPU_FAN2 CPU-FAN1 4-pin 3-pin 3-pin [2-3] FM_CPU1 1 2 2 3 PWM NCL-DSR1 ® DC mode (Default) FM_CPU2 NCL-DSR1 FM_CPU setting 5.
6.Gigabit LAN1 3-pin LAN1_EN1) [1-2] LAN1_EN1 NCL-DSR1 ® LAN1 Broadcom BCM5721 Gigabit 10/100/1000BASE-T 1 2 2 3 Disable Enable (Default) NCL-DSR1 LAN1_EN setting 7.Gigabit LAN2 3-pin LAN2_EN1 [1-2] LAN2_EN1 NCL-DSR1 ® LAN2 Broadcom BCM5721 Gigabit 10/100/1000BASE-T 1 2 Enable (Default) 2 3 Disable NCL-DSR1 LAN2_EN setting 8.
9.BIOS (3-pin RECOVERY1) BIOS BIOS 1 AFUDOS.EXE ROM BIOS xxxx-xxx.
4.4 4.4.1 1 LAN 2 LAN 1 2 6 1. PS/2 2. PS/2 3. USB 2.0 USB 2.0 4. VGA VGA 5. 5 4 3 PS/2 PS/2 USB 15-pin VGA 9-pin COM1 6.
4.4.2 IDE 34-1 pin FLOPPY1 NCL-DSR1 ® 1. FLOPPY1 PIN 1 NOTE: Orient the red markings on the floppy ribbon cable to PIN 1. NCL-DSR1 Floppy disk drive connector COM2 10-1 pin COM2 ( ) BIOS COM2 COM2 ® COM2 COM2 NCL-DSR1 2.
3.IDE 40-1 pin PRI_IDE SEC_IDE IDE UltraDMA/100/66 IDE CD-ROM IDE IDE Master Primary Secondary UltraDMA/100/66 IDE Master UltraDMA/100/66 IDE Slave Slave Slave UltraDMA/100/66 1. 2. UltraDMA/100/66 IDE UltraDMA UltraDMA/100/66 ® SEC_IDE NCL-DSR1 PIN 1 PRI_IDE PIN 1 NCL-DSR1 IDE connectors NOTE: Orient the red markings (usually zigzag) on the IDE ribbon cable to PIN 1.
4. SMBus 5-pin PSUSMB1 SMBus System Management Bus NCL-DSR1 ® I2C_7_CLK# I2C_7_DATA# NC GND +3.3V Remote Sense SMBus PSUSMB1 NCL-DSR1 Power supply SMBus connector 5.
6. 24-pin ATXPWR1, 8-pin ATX12V1 ATX +12V ATXPWR 8-pin +12V ATXPWR1 ATX12V1 24-pin Power Connector 8-pin +3 Volts -12 Volts Ground PSON# Ground Ground Ground -5 Volts +5 Volts +5 Volts +5 Volts Ground 12V 12V 12V 12V NCL-DSR1 ® GND GND GND GND +3 Volts +3 Volts Ground +5 Volts Ground +5 Volts Ground Power OK +5V Standby +12 Volts +12 Volts +3 Volts 24 NCL-DSR1 ATX Power connectors 7. For Power Supply with 24-pin Power Connector 4-pin CPU_FAN1/2, 3-pin REAR_FAN1/2, FRNT_FAN1/2 350 740 8.
8.
9.Ultra320 SCSI 68-pin SCSIA1, SCSIB1 68-pin Ultra320 SCSI 15 Ultra320 SCSIB1 68-Pin Ultra320/ Ultra2-Wide SCSI Connector NCL-DSR1 ® 1 35 SCSIA1 68-Pin Ultra320/ Ultra2-Wide SCSI Connector 34 68 34 68 1 35 NCL-DSR1 Onboard SCSI connectors SCSI SCSI single-ended (SE) Ultra2 Ultra160 12 25 320MB/sec SE SCSI Ultra320 Ultra160 Ultra2 Ultra320 I/O SCSI Ultra320 SE 1.
10.SCSI/SATA 4-pin HDLED1 SCSI/SATA SCSI SATA HDLED1 NCL-DSR1 ® SCSI_ACTLED+ SCSI_ACTLEDSCSI_ACTLEDSCSI_ACTLED+ 1 NCL-DSR1 SCSI/SATA card activity LED connector 11.
NCL-DSR1 System panel connector IDE_LED Reset 4-18 NMIBTN# GND POWERBTN# GND NC RESETBTN# GND HDLED+ HDLED- ® POWERLED+ NC POWERLEDMLED+ MLEDNC +5V GND GND SPKROUT NCL-DSR1 12.
NCL-DSR1 Auxiliary panel connector RS160-E2/CS3 +5VSB PIN1 CASEOPEN GND LOCATORLED1+ LOCATORLED1LOCATORBTN# GND LOCATORLED2LOCATORLED2+ ® GND I2C_4_DATA# +5VSB LAN1_LINKACTLED+ LAN1_LINKACTLEDLAN2_LINKACTLEDLAN2_LINKACTLED+ NC I2C_4_CLK# NCL-DSR1 13.
4-20
BIOS BIOS BIOS BIOS
5.1 BIOS BIOS 1. ASUS AFUDOS DOS 2. ASUS CrashFree BIOS 2 BIOS BIOS 3. ASUS Update Windows BIOS BIOS BIOS BIOS AFUDOS BIOS 5.1.1 1. DOS a. b. 1.44MB DOS format A:/S Enter Windows XP a. b. c. d. e. 5-2 1.
5.1.2 AFUDOS AFUDOS BIOS DOS AFUDOS BIOS BIOS BIOS BIOS BIOS BIOS 600KB BIOS 1. 2. AFUDOS afudos.exe DOS afudos /o[filename] filename A:\>afudos /oOLDBIOS1.ROM 3. Enter BIOS A:\>afudos /oOLDBIOS1.ROM AMI Firmware Update Utility - Version 1.10 Copyright (C) 2002 American Megatrends, Inc. All rights reserved. Reading flash ..... done A:\> BIOS RS160-E2/CS3 DOS 5-3
BIOS AFUDOS tw.asus.com 1. BIOS BIOS BIOS 2. 3. AFUDOS.EXE BIOS DOS afudos /i[filename] filename BIOS A:\>afudos /iNCL-DS1.ROM 4. AFUDOS BIOS A:\>afudos /iNCL-DS1.ROM AMI Firmware Update Utility - Version 1.10 Copyright (C) 2002 American Megatrends, Inc. All rights reserved. Reading file ..... done Erasing flash .... done Writing flash .... 0x0008CC00 (9%) BIOS 5. BIOS DOS A:\>afudos /iNCL-DS1.ROM AMI Firmware Update Utility - Version 1.10 Copyright (C) 2002 American Megatrends, Inc.
5.1.3 CrashFree BIOS 2 BIOS CrashFree BIOS 2 BIOS 1. BIOS BIOS BIOS BIOS 2. BIOS NCLDS1R1.ROM BIOS BIOS 1. 2. 3. BIOS BIOS Bad BIOS checksum. Starting BIOS recovery... Checking for floppy... BIOS Bad BIOS checksum. Starting BIOS recovery... Checking for floppy... Floppy found! Reading file “NCLDS1R1.ROM”. Completed. Start flashing... BIOS 4.
BIOS BIOS 1. 2. 3. BIOS Bad BIOS checksum. Starting BIOS recovery... Checking for floppy... Bad BIOS checksum. Starting BIOS recovery... Checking for floppy... Floppy not found! Checking for CD-ROM... CD-ROM found. Reading file “NCLDS1R1.ROM”. Completed. Start flashing... BIOS 4. BIOS BIOS http://tw.asus.
5.1.4 Windows BIOS 1. 2. 3. 4. 5. BIOS BIOS BIOS BIOS BIOS BIOS ISP 1. 2. 3. VX.XX.
BIOS BIOS ASUS ASUSUpdate ASUSUpdate 1. 2. Update BIOS from the Internet Next 3.
4. BIOS Next 5. BIOS BIOS BIOS BIOS BIOS 1. BIOS ASUS ASUSUpdate ASUSUpdate 2. from a file Update BIOS Next 3. BIOS 4.
5.2 BIOS BIOS Basic Input and Output System BIOS BIOS BIOS RUN SETUP BIOS BIOS Flash ROM BIOS Flash ROM BIOS BIOS BIOS CMOS RAM BIOS POST Power-On Self Test DELETE DELETE RESET Alt Ctrl + Delete BIOS 1. BIOS BIOS BIOS 2. 3. 5-10 Load Setup Defaults BIOS tw.asus.
5.2.1 BIOS System Time System Date Legacy Diskette A Primary IDE Master Primary IDE Slave Third IDE Master Third IDE Slave Fourth IDE Master Fourth IDE Slave IDE Configuration [11:10:19] [Fri 08/06/2004] [1.44M, 3.5 in] : : : : : : [ST320413A] [ASUS CD-S520/A] [Not Detected] [Not Detected] [Not Detected] [Not Detected] Use [ENTER], [TAB] or [SHIFT-TAB] to select a field. Use [+] or [-] to configure the System time. System Information 5.2.2 BIOS Main Advanced Power Boot Exit BIOS 5.2.
5.2.4 System Time [11:51:19] System Date [Thu 05/07/2004] Legacy Diskette A [1.44M, 3.5 in] Primary IDE Master : [ST320413A] Primary IDE Slave : [ASUS CD-S520/A Third IDE Master : [Not Detected] Third IDE Slave : [Not Detected] Fourth IDE Master : [Not Detected] Fourth IDE Slave : [Not Detected] IDE Configuration System Information Main Advanced Power Boot Use [ENTER], [TAB] or [SHIFTTAB] to select a field. Use [+] or [-] to configure the System time. Exit 5.2.5 Enter 5.2.
5.3 Main Menu BIOS 5.2.1 BIOS System Time System Date Legacy Diskette A Use [ENTER], [TAB] or [SHIFT-TAB] to select a field. [11:10:19] [Fri 08/06/2004] [1.44M, 3.5 in] Primary IDE Master Primary IDE Slave Third IDE Master Third IDE Slave Fourth IDE Master Fourth IDE Slave IDE Configuration : : : : : : Use [+] or [-] to configure the System time. [ST320413A] [ASUS CD-S520/A] [Not Detected] [Not Detected] [Not Detected] [Not Detected] System Information 5.3.
5.3.4 IDE Primary, Third and Fourth IDE Master/Slave BIOS IDE IDE Enter Primary IDE Master Device Vendor Size LBA Mode Block Mode PIO Mode Async DMA Ultra DMA SMART Monitoring : : : : : : : : : Hard Disk ST320413A 20.0GB Supported 16 Sectors Supported MultiWord DMA-2 Ultra DMA-5 Supported Select the type of device connected to the system.
Block (Multi-sector Transfer) [Auto] [Auto] [Disabled] [Disabled] [Auto] PIO Mode [Auto] PIO [Auto] [0] [1] [2] [3] [4] DMA Mode [Auto] DMA [Auto] [SWDMA0] [SWDMA1] [SWDMA2] [MWDMA0] [MWDMA1] [MWDMA2] [UDMA0] [UDMA1] [UDMA2] [UDMA3] [UDMA4] [UDMA5] [UDMA6] SMART Monitoring [Auto] Smart Monitoring, Analysis, and [Auto] [Disabled] [Enabled] Reporting Technology 32Bit Data Transfer [Disabled] 32 [Disabled] [Enabled] 5.3.
Enhanced Mode Support On [S-ATA mode] [S-ATA] ATA ATA M S - D O S Windows 98SE/ME ATA [P-ATA+S-ATA] ATA [P-ATA] [S-ATA] [P-ATA+S-ATA] [S-ATA Mode] [P-ATA] IDE Detect Time Out [35] ATA/ATAPI [5] [10] [15] [20] [25] [30] [35] 5.3.6 [0] System Information BIOS AMIBIOS Version : 08.00.10 Build Date : 07/23/04 Processor Type Speed Count : Intel(R) Xeon(TM) CPU 2.
5.4 Advanced menu Configure the USB support. USB Configuration MPS Configuration Remote Access Configuration CPU Configuration Chipset Onboard Devices Configuration PCI PnP 5.4.1 USB USB Configuration USB USB Configuration Enables USB host controllers. Module Version - 2.23.2-5.3 USB Devices Enabled: None USB Function Legacy USB Support USB 2.0 Controller USB 2.
USB Function [Enabled] USB Ports] [4 USB Ports] [6 USB Ports] [8 USB Ports] [Diabled] [2 USB Legacy USB Support [Auto] USB [Auto] USB USB [Disabled] USB [Disabled] [Enabled] [Auto] USB USB 2.0 Controller [Enabled] USB 2.0 [Diabled] [Enabled] USB 2.0 Controller MODE [HiSpeed] USB 2.
SB Mass Storage Reset Delay [20 Sec] POST USB USB mass storage device [10 Sec ] [20 Sec] [30 Sec] [40 Sec] detected Emulation Type [N/A] Auto USB FDD FDD 530 MB HDD ZIP 5.2.1 BIOS 5.4.2 MPS MPS Configuration USB MPS Configuration MPS Revision [1.4] Enables USB host controllers. MPS Revision [1.4] [1.1] [1.
5.4.3 Remote Access Configuration Configure Remote Access type and parameters Remote Access Enables USB host controllers. [Enabled] Remote Access [Enabled] [Disabled] [Enabled] 5.4.4 CPU Configuration Configure Advanced CPU settings Manufacturer: Brand String: Frequency : FSB Speed : Intel Intel(R) Xeon (TM) CPU 2.
Enhanced C1 Control [Auto] C1E [Auto] [Disabled] [Auto] BIOS CPU CPU CPU idle C1E CPU Internal Thermal Control [Auto] [Auto] BIOS [Auto] [Disabled] Intel(R) Speedstep(tm) Tech [Automatic] [Automatic] BIOS Intel [Minimum Speed] [Automatic] [Disabled] 5.4.5 Speedstep [Maximum Speed] Chipset Enter Advanced Chipset Settings Warning: Setting wrong values in below sections may cause system to malfunction.
NorthBridge Chipset Configuration DIMM Speed: DDR 333 Memory Remap Feature Memory Mirroring/Sparing [Enabled] [Disabled] DIMM Speed DIMM Memory Remap Feature [Enabled] [Disabled] [Enabled] Memory Mirroring/Sparing [Disabled] Mirroring [Disabled] [Mirroring] [Sparing] 5-22 BIOS Sparing
5.4.6 OnBoard Devices Configuration Configure Win627EHF Super IO Chipset Serial Port1 Address Serial Port2 Address Serial Port2 Mode Enable or disable Azalia controller.
5.4.7 PCI PCI PnP PCI/PnP DMA PCI/PnP Advanced PCI/PnP Settings WARNING: Setting wrong values in below sections may cause system to malfunction.
PCI IDE BusMaster [Enabled] BIOS PCI [Disabled] [Enabled] IDE OffBoard PCI/ISA IDE Card [Auto] PCI IDE PCI [Auto] [PCI Slot1] [PCI Slot2] [PCI Slot3] [PCI Slot4] [PCI Slot5] [PCI Slot6] IRQ-xx assigned to [PCI Device] [PCI Device] [Reserved] IRQ [PCI Device] [Reserved] IRQ-15 assigned to DMA DMA DMA DMA DMA DMA Channel Channel Channel Channel Channel Channel 0 1 3 5 6 7 Reserved Memory Size IRQ PCI/PnP ISA [PCI Device] [PCI [PCI [PCI [PCI [PCI [PCI Device] Device] Device] Device] Device] Device]
5.5 Power menu APM ACPI APIC Support Select the ACPI state used for System Suspend. [Enabled] APM Configuration Hardware Monitor 5.5.1 ACPI APIC Support [Enabled] ACPI APIC RSDT [Disabled] [Enabled] 5.5.
Suspend Time Out [Disabled] [Disabled] [1 Min] [2 Min] [4 Min][8 Min] [10 Min] [20 Min] [30 Min] [40 Min] [50 Min] [60 Min] Throttle Slow Clock Ratio [50%] throttle [62.5%] [50.0%] [37.5%] [25.0%] [12.5%] [87.5%] [75.
Power On By PME# [Disabled] [Enabled] [Disabled] [Enabled] PME Power On By RTC Alarm [Disabled] (RTC) [Enabled] RTC Alarm Date RTC Alarm Hour RTC Alarm Minute RTC Alarm Second [Disabled] [Enabled] 5-28 BIOS
5.5.3 Hardware Monitor Hardware Monitor CPU1 Temperature CPU2 Temperature MB Temperature [55ºC/131ºF] [N/A] [52ºC/125.5ºF] CPU1 Fan Speed CPU2 Fan Speed Front1 Fan Speed Front2 Fan Speed Rear1 Fan Speed Rear2 Fan Speed [5487 RPM] [N/A] [N/A] [N/A] [N/A] [N/A] Smart Fan Control [Disabled] VCORE1 Voltage VCORE2 Voltage 3.3V Voltage 5V Voltage 5VSB Voltage [ 1.320V] [N/A] [ 3.296V] [ 5.070V] [ 4.992V] VBAT Voltage 12V Voltage [ 3.152V] [12.
Smart Fan Control [Enabled] [Disabled] [Enabled] Smart Fan Control ture [Enabled] CPU1 Temperature CPU2 Tempera- Front1 Temperature Smart Fan Control CPU1 Temperature CPU2 Temperature MB Temperature [Enabled] [055] [055] [050] VCORE1 Voltage VCORE2 Voltage [ 1.356V] [ 1.
5.6 Boot menu APM Configuration Specifies the Boot Device Priority sequence Boot Device Priority Boot Settings Configuration Security 5.6.1 Boot Device Priority Boot Device Priority 1st 2nd 3rd 4th Boot Boot Boot Boot Device Device Device Device [1st FLOPPY DRIVE] [PM-ST330620A] [PS-ASUS CD-S360] [MBA v7.5.
5.6.2 Boot Settings Configuration Boot Settings Configuration Quick Boot Full Screen Logo Bootup Num-Lock PS/2 Mouse Support Wait For ‘F1’ If Error Hit ‘DEL’ Message Display Interrupt 19 Capture Allows BIOS to skip certain tests while booting. This will decrease the time needed to boot the system.
Wait for F1 If Error [Enabled] [Enabled] [F1] [Disabled] [Enabled] Hit DEL Message Display [Enabled] run Setup [Enabled] [Disabled] [Enabled] Press DEL to Interrupt 19 Capture [Enabled] PCI Interrupt 19 [Disabled] [Enabled] RS160-E2/CS3 SCSI [Enabled] 5-33
5.6.3 Security Security Settings Supervisor Password User Password to change password. again to disabled password. : Not Installed : Not Installed Change Supervisor Password Change Supervisor Password Not Installed Installed Supervisor Password Change Supervisor Password Enter Enter Password Enter Enter Confirm Password 1. 2. 3. Password Installed. Password do not match! Supervisor Password Installed Change Supervisor Word Enter Enter Password Password uninstalled.
Security Settings Supervisor Password User Password : Installed : Not Installed Change Supervisor Password User Access Level Change User Password Clear User Password Password Check [Full Access] [Setup] User Access Level [Full Access] BIOS BIOS [No Access] [View Only] [Limited] [Full Access] BIOS BIOS BIOS BIOS Change User Password 1. 2. Not Installed User Password Change User Password Enter Password Installed [Enter] [Enter] 3. Confirm Password Password Installed.
Change User Word Enter Password Password uninstalled. [Enter] Clear User Password Password Check [Setup] [Setup] BIOS BIOS [Always] BIOS [Setup] [Always] 5.
BIOS now? [Yes] Esc BIOS Discard configuration changes and exit BIOS [No] BIOS Exit & Discard Changes BIOS Enter CMOS [Cancel] [OK] BIOS BIOS Discard Changes Enter BIOS BIOS [OK] [Cancel] BIOS Load Setup Defaults F5 [Yes] [No] Enter BIOS BIOS RS160-E2/CS3 5-37
5-38 BIOS
6.
6.2 SCSI HostRAID Adaptec AIC-7902 SCSI 6.2.1 HostRAID 1. Ctrl-A SCSIselect(TM) Utility 2. AIC-7902 SCSI Channel A Channel B 3. 4.
5. 6. SCSI Enabled HostRAID < Esc > /View HostRAID Settings] 6.2.2 1. 1.3.1 HostRAID Setting] HostRAID < Enter > RAID SCSI < Enter > RAID0 6-4 [Configure RAID 0 2. 3.
4. < Space > < Enter > 5.
6. RAID 0 1 15 7. Yes Array Array Yes No 8.
6.2.3 1. RAID 1 1.3.1 HostRAID Setting] 2. 3.
4. < Space > < Enter > 5.
6. RAID 1 < Enter > Yes 7. Yes Array Array Yes No 8.
6.2.4 1. RAID 0+1 1.3.1 HostRAID Setting] 2. SCSI 3.
4. < Space > < Enter > 5. Strip Size 6. < Enter > RAID 10 1 15 7.
8.
6.2.5 RAID RAID 0 1. 2. [Configure/View HostRAID Setting] RAID 0 < Enter > RAID RAID 0 RAID 1 1. 2.
RAID 10 1. 2. [Configure/View HostRAID Setting] RAID 10 < Enter > RAID 10 RAID < Enter > 6.2.6 Add hot-spare 1. 2. 3. [Configure/View HostRAID Setting] RAID 10 < Enter > Enter > [Add spare] Hot-spare Status Free 6.2.7 Building RAID 1 1.
A 6.2.
6.3 Adaptec AIC-7902 SCSI HostRAID RAID RAID 6.3.1 Adaptec AIC-7902 SCSI HostRAID Windows 2000/2003 Windows RAID RAID 1. 2. 32 exe win32.exe win64-2k3. Windows 2003 64 Windows 2003 RAID Adaptec AIC-7902 SCSI HostRAID Driver Disk \Drivers\Adaptec\7902W\HostRAID\MakeDisk 3. 4. 5. RAID DOS RAID 1.
6.3.2 Adaptec AIC-7902 SCSI HostRAID Windows 2000/2003 Server Windows 2000/2003 Server Adaptec AIC-7902 SCSI HostRAID 1. Windows 2000/2003 Server Windows 2000/2003 2. Press F6 if you need to install a thrid party SCSI or RAID driver... 3.
4. HostRAID 5. 6. 7. 6-18 Adaptec AIC-7902 SCSI Adaptec HostRAID U320 Driver Ver 1.
Red Hat Linux Red Hat Linux SCSI/RAID DOS 1. DOS FreeDos b) E:\Drivers\Adaptec\ E: Linux E:\Driver\Adaptec\ HostRAID\driver\linux\ 2.
3. 4.
5. fd0 OK Enter 6. 7.
6.4 Broadcom 5721 6.4.1 Windows 6.4.1.1 Broadcom 5721 Windows 2000/2003/XP Broadcom 5721 1. Broadcom 5721 Broadcom 5721 Lan Driver BIN 2. 6-22 ASSETUP.
6.4.1.
6.4.2 6.4.2.1 Linux TAR 1. TAR tar xvzf bcm5700-.tar.gz bcm5700-.tar.gz Linux\Driver 2. bcm5700.o cd bcm5700-/src make install 3. insomde bcm5700.o 4. make install 6-24 \Drivers\Lan\
RPM 5.
6.5 VGA 6.5.1 ATI RAGE XL Windows 2000 Server Windows XP/2003 Server ATI RAGE XL Windows 2000 Windows 2000 Windows 2003/XP Windows 2000 ATI Rage XL 1. ATI Rage XL E:\Drivers\ATI\W2K Setup.
2.
6-28
