User Guide

2-13ASUS RS120-E5/S
2.5 Expansion slot
2.5.1 Installing an expansion card to the riser card bracket
The barebone server comes with a riser card bracket. You need to remove the
bracket if you want to install a PCIE X16 (x8 link) and/or a PCIE x8 (x4 link)
expansion cards.
To install a PCIE x8 card:
2. Place the riser card bracket on
a at and stable surface, then
remove the screw from the PCIE x8
slot bay.
3. Install a PCIE x8 card to the
bracket as shown, then secure the
card with a screw.
1. Firmly hold the riser card bracket,
then pull it up to detach it from
the PCI Express slot on the
motherboard.
PCIE x8 slot