User Guide

2-21
ASUS RS100-E9-PI2
5. Secure the 3.5-inch Serial ATA HDD
into the HDD drive tray using the
bundledsetofscrews(asshown).
UseanL-typeSATAconnectorto
connect the 3.5-inch SATA HDD to
themotherboard.
7. ConnecttheSATAsignalcableand
thepowercablefromthepower
supply to the 3.5-inch HDD.
6. Place and orient the HDD drive tray
and3.5-inchSATAHDDassembly
as shown.
8. Secure the 3.5-inch SATA HDD and
HDDdrivetrayassemblytotheHDD
bay2usingthescrewsremovedin
step 2.
Ensure that the HDD drive tray is
seated securely in place.