User Guide

Chapter 2: Hardware Information
2-2
2.1 Chassis cover
2.1.1 Removing the chassis cover
• Unplugthepowercordbeforeremovingthechassiscover.
• Takeextracarewhenremovingthechassiscover.Keepyourngersawayfrom
componentsinsidethechassisthatcancauseinjury,suchastheCPUfan,rearfan,
and parts with sharp or protruding edges.
• Theimagesofthebareboneservershowninthissectionareforreferencepurposes
onlyandmaynotexactlymatchthemodelyoupurchased.
To remove the chassis cover:
1. UseaPhillipsscrewdrivertoremovethethreescrewsonthechassiscover.
2. Firmlyholdthecoverandslideittowardtherearpanelforabouthalfaninchuntilitis
disengaged from the chassis. Then, lift the cover from the chassis.