User Guide

5-32

Chapter 5: BIOS Setup

SATA Controller(s) [Enabled]

Allows you to enable or disable the SATA Device.

Congurationoptions:[Enabled][Disabled]

SATA Mode Selection [AHCI]

ThisitemallowsyoutosettheSATAconguration.

[AHCI] Setto[AHCI]whenyouwanttheSATAharddiskdrivestousetheAHCI

(Advanced Host Controller Interface). The AHCI allows the onboard storage

driver to enable advanced Serial ATA features that increases storage

performanceonrandomworkloadsbyallowingthedrivetointernally

optimize the order of commands.

[RAID] Setto[RAID]whenyouwanttocreateaRAIDcongurationfromtheSATA

harddiskdrives.

Software Feature Mask Configuration

RAID0 [Enabled]

Allows you to enable or disable the RAID0 feature.