Owner manual

English

Signal Indicators

• To get the best performance, place the Range Extender between your router and wireless device.

• The 2.4GHz & 5GHz signal indicators indicate the connection

performance from the Range Extender to the Router. Refer

to the LED indicators in section A Quick Look.

• If the router does not support or has weak 5GHz signal, only

the 2.4GHz signal indicators will light up.

• If no 2.4GHz signal indicator lights up, search the network

again in Option A or make sure that your router supports

WPS in Option B.

NOTE: The 2.4GHz and 5GHz signal indicators may light up asymmetrically.

Existing Wi-Fi network name: existing NetworkName

New Extender 2.4GHz network name: existing NetworkName_RPT

New Extender 5GHz network name: existing NetworkName_RPT5G

To connect an additional Wi-Fi device to your Extender network, use the same network password as that

of your existing wireless router.

Move the Range Extender

When the connection is complete, locate the Range Ex-

tender between the router and the wireless device to get

better performance.

NOTE: To get the best connection performance, ensure that at least two signal indicators light up.