Owner manual

English

• Connect your wireless devices to the

new Extender network.

• Enter a name for the new Extender

network.

Option B: Using WPS (Wi-Fi Protected Setup)

1. Press the WPS button on the side of the Range Extender for more than two seconds, until the system

indicator ashes.

2. Press the WPS button on the router within two minutes.

NOTE: Refer to the router’s manual for the location of the WPS button.

3. Check if the Range Extender’s system indicator

turns into solid blue, which indicates that the

Range Extender has connected to the wireless

network successfully. The Range Extender’s

wireless network name (SSID) changes to your

existing Wi-Fi network name, ending with _RPT

or _RPT5G. For example: