Quick Start Guide

Se o seu roteador AiMesh não encontrar nenhum RP-AX58 próximo
ou a sincronização falhar, verifique o seguinte e tente novamente.
i. Faça o download da firmware compatível com
AiMesh em: https://www.asus.com/AiMesh/.
ii. Inicie o GUI da Web. Você será redirecionado para o
Assistente de Instalação ASUS. Se não, navegue até
http://www.asusrouter.com.
iii. Vá para Administração > Atualização do firmware.
Clique em Escolher arquivo e carregue firmware
compatível com AiMesh.
iv. Depois que o firmware for carregado, vá para a
página do Mapa de Rede para verificar e certificar-
se de que o ícone AiMesh apareça.
v. Use um alfinete para pressionar o botão de reset em
seu RP-AX58 por pelo menos 5 segundos. Solte o
botão de reinicialização quando o LED de energia
estiver piscando lentamente.
Q1
A: Sim. O sistema AiMesh suporta tanto conexão
sem fio quanto com fio entre o roteador e o
nó AiMesh para maximizar o rendimento e a
estabilidade. O AiMesh analisa a força do sinal sem
fio para cada banda de freqüência disponível, e
então determina automaticamente se uma conexão
sem fio ou com fio é a melhor para servir como
backbone de conexão inter-roteador.
Para saber mais sobre o ASUS AiMesh, acesse https://www.asus.com/AiMesh/.
PMF
SOLUÇÃO DE PROBLEMAS
PERGUNTAS MAIS FREQÜENTES
a
Conecte RP-AX58 em uma tomada próxima
ao seu roteador/AP. Certifique-se de que ele
esteja dentro de 3 metros do roteador AiMesh.
b
Seu roteador AiMesh é atualizado para
firmware compatível com AiMesh.
Posso configurar conexão com fio entre os roteadores AiMesh e nós
(Backhaul Ethernet)?
1
Siga as etapas de configuração para estabelecer uma conexão
entre o roteador AiMesh e RP-AX58 via WiFi primeiro.
2
Coloque o RP-AX58 em um local ideal para uma melhor
cobertura. Passe um cabo Ethernet da porta LAN do roteador
AiMesh para a porta de backhaul Ethernet do RP-AX58.
3
O sistema AiMesh selecionará automaticamente
o melhor caminho para a transmissão de dados,
seja com ou sem fio.
ASUS Recycling/Takeback Services
ASUS recycling and takeback programs come from our commitment to the highest
standards for protecting our environment. We believe in providing solutions for you to
be able to responsibly recycle our products, batteries, other components, as well as the
packaging materials. Please go to http://csr.asus.com/english/Takeback.htm for the detailed
recycling information in dierent regions.
REACH
Complying with the REACH (Registration, Evaluation, Authorisation, and Restriction of
Chemicals) regulatory framework, we published the chemical substances in our products at
ASUS REACH website at http://csr.asus.com/english/REACH.htm
Federal Communications Commission Statement
This device complies with Part 15 of the FCC Rules. Operation is subject to the following
two conditions:
• This device may not cause harmful interference.
• This device must accept any interference received, including interference that may
cause undesired operation.
This equipment has been tested and found to comply with the limits for a class B digital de-
vice, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential installation.
This equipment generates, uses and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause harmful interference
to radio communications. However, there is no guarantee that interference will not occur
in a particular installation. If this equipment does cause harmful interference to radio
or television reception, which can be determined by turning the equipment o and on,
the user is encouraged to try to correct the interference by one or more of the following
measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit dierent from that to which the
receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
WARNING! Any changes or modications not expressly approved by the
party responsible for compliance could void the user’s authority to operate
the equipment.
This device is restricted for indoor use.
Prohibition of Co-location
This device and its antenna(s) must not be co-located or operating in conjunction with any
other antenna or transmitter.
IMPORTANT NOTE:
Radiation Exposure Statement: This equipment complies with FCC radiation exposure
limits set forth for an uncontrolled environment. End users must follow the specic
operating instructions for satisfying RF exposure compliance. To maintain compliance with
FCC exposure compliance requirement, please follow operation instruction as documented
in this manual.
WARNING! This equipment must be installed and operated in accordance
with provided instructions and the antenna(s) used for this transmitter must
be installed to provide a separation distance of at least 44 cm from all persons
and must not be co-located or operating in conjunction with any other
antenna or transmitter.
Compliance Statement of Innovation, Science and Economic
Development Canada (ISED)
This device complies with Innovation, Science and Economic Development Canada licence
exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device
may not cause interference, and (2) this device must accept any interference, including
interference that may cause undesired operation of the device.
Operation in the band 5150–5250 MHz is only for indoor use to reduce the potential for
harmful interference to co-channel mobile satellite systems.
CAN ICES-003(B)/NMB-003(B)
Radio Frequency (RF) Exposure Information
The radiated output power of the ASUS Wireless Device is below the Innovation, Science
and Economic Development Canada radio frequency exposure limits. The ASUS Wireless
Device should be used in such a manner such that the potential for human contact during
normal operation is minimized.
This equipment should be installed and operated with a minimum distance of 25 cm
between the radiator any part of your body.
This device has been certied for use in Canada. Status of the listing in the Innovation,
Science and Economic Development Canada’s REL (Radio Equipment List) can be found at
the following web address: http://www.ic.gc.ca/eic/site/ceb-bhst.nsf/eng/h_tt00020.html
Additional Canadian information on RF exposure also can be found at the following web:
https://www.ic.gc.ca/eic/site/smt-gst.nsf/eng/sf08792.html
Déclaration de conformité de Innovation, Sciences et Développement
économique Canada (ISED)
Le présent appareil est conforme aux CNR d’Innovation, Sciences et Développement
économique Canada applicables aux appareils radio exempts de licence. L’exploitation est
autorisée aux deux conditions suivantes : (1) l’appareil ne doit pas produire de brouillage,
et (2) l’utilisateur de l’appareil doit accepter tout brouillage radioélectrique subi, même si le
brouillage est susceptible d’en compromettre le fonctionnement.
La bande 5150 – 5250 MHz est réservée uniquement pour une utilisation à l’intérieur an de
réduire les risques de brouillage préjudiciable aux systèmes de satellites mobiles utilisant
les mêmes canaux.
CAN ICES-003(B)/NMB-003(B)
Informations concernant l’exposition aux fréquences radio (RF)
La puissance de sortie émise par cet appareil sans l est inférieure à la limite d'exposition
aux fréquences radio d'Innovation, Sciences et Développement économique du Canada
(ISED). Utilisez l'appareil sans l de façon à minimiser les contacts humains lors d'un
fonctionnement normal.
Cet équipement doit être installé et utilisé avec un minimum de 25 cm de distance entre la
source de rayonnement et votre corps.
L'utilisation de cet appareil est autorisée au Canada. Pour consulter l'entrée correspondant
à l'appareil dans la liste d'équipement radio (REL - Radio Equipment List) d'Innovation,
Sciences et Développement économique du Canada, rendez-vous sur :
http://www.ic.gc.ca/eic/site/ceb-bhst.nsf/eng/h_tt00020.html
Pour des informations supplémentaires concernant l'exposition aux fréquences radio au
Canada, rendez-vous sur : https://www.ic.gc.ca/eic/site/smt-gst.nsf/eng/sf08792.html
For product available in the US/Canada market, only channel 1~11 can be operated. Selec-
tion of other channels is not possible.
Pour les produits disponibles aux États-Unis et au Canada, seuls les canaux 1 à 11 peuvent
être utilisés. La sélection d’autres canaux n’est pas possible.
Operations in the 5.15-5.25GHz band are restricted to indoor usage only.
Safety Notices
• Use this product in environments with ambient temperatures between 0°C (32°F) and
40°C (104°F).
• Refer to the rating label on the bottom of your product and ensure your power adapter
complies with this rating.
• DO NOT place on uneven or unstable work surfaces. Seek servicing if the casing has
been damaged.
• DO NOT place or drop objects on top and do not shove any foreign objects into the
product.
• DO NOT expose to or use near liquids, rain, or moisture. DO NOT use the modem during
electrical storms.
• DO NOT cover the vents on the product to prevent the system from getting overheated.
• DO NOT use damaged power cords, accessories, or other peripherals.
• If the Adapter is broken, do not try to x it by yourself. Contact a qualied service techni-
cian or your retailer.
• To prevent electrical shock hazard, disconnect the power cable from the electrical outlet
before relocating the system.
Porta LAN para LAN (Ethernet backhaul)
c
ETAPAS
Baixar o Aplicativo de Roteador ASUS.
Se você já possui um roteador AiMesh e vai criar um sistema AiMesh, baixe e instale o aplicativo ASUS Router para fazer
a configuração do RP-AX58.
Q2
Como configurar o modo Access Point (AP) em um Extensor de
alcance de WiFi ASUS?
1
Abra um navegador da web e digite
http://www.asusrouter.com.
2
Se estiver fazendo login na GUI da Web pela primeira
vez, você será direcionado automaticamente para
a página Quick Internet Setup (QIS). Clique em
Configurações avançadas.
3
Clique em Escolher modo de operação
e clique em mode Access Point(AP).
4
Clique em IP automático e, em
seguida, clique para configurar os SSIDs
separadamente.
5
Pela primeira vez, você precisará
configurar o nome de usuário e a senha
do seu RP AX58. Ao terminar de digitar,
clique em Próximo. A configuração do
modo Access Point (AP) foi concluída.
Siga as instruções na tela para configurar seu roteador AiMesh.
2
1
Toque em e selecione Adicionar nó AiMesh.
3
Selecione RP-AX58 um siga as instruções na tela para finalizar a configuração.
4
MÉTODOS DE CONFIGURAÇÃO
Configure o RP-AX58 como o nó AiMesh