Quick Start Guide

6
ENGLISH
Frequently Asked Questions
Q1: What should I do if my router does not support WPS?
 •YoucanuseMethodTwotosetupRP-AC55.
Q2: Why is it that the LED indicator for the current network does not light up after the Wi-Fi setup is
complete?
 •Youmayhaveenteredthewrongpasswordfortherouter/AP.PleaserestartyourRP-AC55,enterthecorrectpassword,andtryto
set up your RP-AC55 again.
Q3: Why is it that I cannot see the login page after entering http://repeater.asus.com in the browser?
 •EnsurethatyourcomputerisconnectedtoyourRP-AC55networkonly,andsetyourcomputertoObtain an IP address au-
tomatically. If you still cannot nd the login page, please download the ASUS Device Discovery utility. You can download the
utility for Windows and Mac from https://www.asus.com/Networking/RP-AC55/HelpDesk_Download/.
Q4: How do I reset RP-AC55?
 •PresstheRESETbuttononthesideofRP-AC55forabouttwo(2)seconds.Waitforaboutve(5)secondsuntiltheexistingnet-
work LED blinks slowly.
Q5: I cannot access the web GUI to congure the RP-AC55 settings.
• Closeallrunningwebbrowsersandlaunchagain.
• Followthestepsbelowtocongureyourcomputersettingsbasedonits
operating system.
Windows 7
A. Disable the proxy server, if enabled.
1. Click Start > Internet Explorer to launch the web browser.
2. Click Tools > Internet options > Connections tab > LAN settings.
3. From the Local Area Network (LAN) Settings screen, untick Use a proxy server for your LAN.
4. Click OK when done.
U14322_RP-AC55_QSG_V3.indb 6 2018/5/22 18:10:00