User Guide
Table Of Contents
- Contents
- Notices
- Safety information
- Care & Cleaning
- Takeback Services
- Product information for EU energy label
- Chapter 1: Product introduction
- 1.1 Welcome!
- 1.2 Package contents
- 1.3 Monitor introduction
- Chapter 2: Setup
- 2.1 Attaching the arm/base
- 2.2 Cable management
- 2.3 Detaching the arm/base (for VESA wall mount)
- 2.4 Adjusting the monitor
- 2.5 Connecting the cables
- 2.6 Turning on/off the monitor
- Chapter 3: General instructions
- 3.1 OSD (On-Screen Display) menu
- 3.2 Aura
- 3.3 Specifications summary
- 3.4 Outline dimensions
- 3.5 Troubleshooting (FAQ)
- 3.6 Supported operating modes
3-1ASUS PG32UQXR Series LCD Monitor
3.1 OSD (On-Screen Display) menu
3.1.1 How to reconfigure
Back Enter Select Exit
Volume 80
160Hz
3840x2160
Gaming
Image
Color
Input Select
PIP/PBP Setup
Variable OD
VRR
ELMB
GamePlus
GameVisual
Shadow Boost
Input Select
DisplayPort-1
GameVisual
Racing Mode
HDR
OFF
1. After the monitor is turned on, turn the OSD dial left/right to select Menu
and press the OK button to activate the OSD menu.
2. Turn the OSD dial left/right to navigate through the functions. Highlight the
desired function and press the OK button to activate it. If the function selected
has a sub-menu, turn the OSD dial left/right to navigate through the sub-
menu functions. Highlight the desired sub-menu function and press the OK
button to activate it.
3. Turn the OSD dial left/right to change the settings of the selected
function.
4. To exit and save the OSD menu, press the Back button repeatedly or
press the
Exit button until the OSD menu disappears. To adjust other
functions, repeat steps 1-3.