User Guide
Table Of Contents
- Contents
- Notices
- Safety information
- Care & Cleaning
- Takeback Services
- Product information for EU energy label
- Chapter 1: Product introduction
- 1.1 Welcome!
- 1.2 Package contents
- 1.3 Monitor introduction
- Chapter 2: Setup
- 2.1 Attaching the arm/base
- 2.2 Cable management
- 2.3 Detaching the arm/base (for VESA wall mount)
- 2.4 Adjusting the monitor
- 2.5 Connecting the cables
- 2.6 Turning on/off the monitor
- Chapter 3: General instructions
- 3.1 OSD (On-Screen Display) menu
- 3.2 Aura
- 3.3 Specifications summary
- 3.4 Outline dimensions
- 3.5 Troubleshooting (FAQ)
- 3.6 Supported operating modes
2-1ASUS PG32UQXR Series LCD Monitor
2.1 Attaching the arm/base
To assemble the monitor base:
1. Take out the monitor as illustrated (Figure 1).
2. Insert the base into the arm (Figure 2).
3. Fix the base to the arm by fastening the bundled screw. (Figure 2).
4. Hold the stand and lift the monitor carefully, then place it on a at surface
(Figure 3).
1
2
1
2
TOP
TOP
3
(Figure 1)
(Figure 3)
(Figure 2)
We recommend that you cover the table surface with soft cloth to prevent
damage to the monitor.
Base screw size: M6 x 15 mm.