User Guide

2-4
ROG Swift OLED PG49WCD Gaming Monitor
• To use the USB type-A/B ports:TakethesuppliedUSB3.2cable,
andplugthesmallerend(type-B)oftheUSBupstreamcabletothe
monitor’sUSBupstreamport,andthelargerend(type-A)toyour
computer’s USB 3.2 port. Make sure your computer is installed with the
lastestWindows10/Windows11operatingsystem.Thatwillenable
the USB hub function on the monitor to work.
• To use the USB type-C port:
a.PlugoneendoftheUSBtype-Ccabletothemonitor’sUSBtype-C
port.
b.ConnecttheotherendoftheUSBtype-Ccabletoyourdevice's
USB type-C port.
• To connect the S/PDIF Optical Digital audio cable:Connectthe
speaker to the monitor’s SPDIF out port.
• To use the earphone:Connecttheendwith3.5mmaudiojacktothe
monitor’s earphone jack.
• To use the USB2.0 port for firmware upgrade at down side:Save
thenewfirmwaretothediskdrive.Thenplugthediskdrivetothe
monitor’s downstream port . Follow the on-screen instructions to
upgradethefirmware.
2.5 Turning On the Monitor
Press the button on the monitor to turn on the monitor.
If the Power Indicator function is enabled and an input source is detected,
thepowerLEDwilllightupredtoindicatethatthemonitoristurnedon.
ThepowerLEDwillnotlightupinPowerSavingmode.