E13863 ROG SWIFT OLED PG49WCD U S E R G U I D E
First Edition August 2023 Copyright © 2023 ASUSTeK COMPUTER INC. All Rights Reserved. No part of this manual, including the products and software described in it, may be reproduced, transmitted, transcribed, stored in a retrieval system, or translated into any language in any form or by any means, except documentation kept by the purchaser for backup purposes, without the express written permission of ASUSTeK COMPUTER INC. (“ASUS”).
Contents Notices.......................................................................................................... iv Safety Information........................................................................................ v Care & Cleaning........................................................................................... vi Takeback Services...................................................................................... vii Chapter 1: Product Introduction 1.1 Welcome!..............
Notices Federal Communications Commission Statement This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: • • This device may not cause harmful interference, and This device must accept any interference received including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.
Safety Information • Before setting up the monitor, carefully read all the documentation that came with the package. • To prevent fire or shock hazard, never expose the monitor to rain or moisture. • Never try to open the monitor cabinet. The dangerous high voltages inside the monitor may result in serious physical injury. • If the power supply is broken, do not try to fix it by yourself. Contact a qualified service technician or your retailer.
This symbol of the crossed out wheeled bin indicates that the product (electrical, electronic equipment, and mercury-containing button cell battery) should not be placed in municipal waste. Please check local regulations for disposal of electronic products. AEEE yönetmeliğine uygundur Care & Cleaning • Before you lift or reposition your monitor, it is better to disconnect the cables and power cord. Follow the correct lifting techniques when positioning the monitor.
Conventions used in this guide WARNING: Information to prevent injury to yourself when trying to complete a task. CAUTION: Information to prevent damage to the components when trying to complete a task. IMPORTANT: Information that you MUST follow to complete a task. NOTE: Tips and additional information to aid in completing a task. Where to find more information Refer to the following sources for additional information and for product and software updates. 1.
Chapter 1: Product Introduction 1.1 Welcome! Thank you for purchasing the ASUS® OLED Gaming monitor! The latest widescreen OLED monitor from ASUS provides a crisper, broader, and brighter display, plus a host of features that enhance your viewing experience. With these features, you can enjoy the convenience and delightful visual experience that the monitor brings to you! 1.
1.3 Monitor Introduction 1.3.1 Front View 1 3 Close button: 1. • Exit the OSD menu. • Turn on the OSD menu when the monitor enters standby mode or display the "NO SIGNAL" message. Control buttons: 2. 3. 2 • Turn on the OSD menu. Enact the selected OSD menu item. • Increase/Decrease values or moves your selection up/down/left/ right. Power button: Turn the monitor on/off.
1.3.2 Back View 1 90W USB 11 90W USB 2 3 5 6 7 8 1 9 10 1. USB2.0 downstream ports: These ports are for connection with USB 2.0 devices, such as USB keyboard/mouse, USB flash drive, etc. 2. AC-IN port: This port connects the power cord. 3. HDMI port: This port is for connection with an HDMI V2.1 compatible device. 4. DisplayPort: This port is for connection with a DisplayPort compatible device. 5. USB type-C Port: This port is for connection with a USB type-C cable.
10. SPDIF out (Optical Digital Audio Out): This output port is for connection with a device that includes an SPDIF input. 11. Kensington lock slot 1.3.3 GamePlus Function The GamePlus function provides a toolkit and creates a better gaming environment for users when playing different types of games. The crosshair overlay with 6 different crosshair options letting you choose the one that best suits the game you're playing.
GamePlus — Sniper Sniper OFF 1.2x 1.2x 1.5x 1.5x 2.0x 2.
1.3.4 GameVisual Function The GameVisual function helps you select among different picture modes in a convenient way. To activate GameVisual: 1. Move the button up. 2. Move the button up/down to select the desired setting. 3. • Scenery Mode: This is the best choice for scenery photo displaying with GameVisualTM Video intelligence Technology. • Racing Mode: This is the best choice for racing game playing with GameVisualTM Video intelligence Technology.
Chapter 2: Setup 2.1 Attaching the Stand 1. Attach and fix the base to the arm by fastening the bundled screw. 2. Align and attach the stand (arm) to the rear of the monitor. 3. Need two people to place the monitor on a stable surface in the upright position. 4. Carefully remove the monitor from the box and EPS packaging. Avoid tilting the monitor backward or forward when unboxing it. 5. 2-1 Place the monitor on a stable surface in the upright position. Remove the protective plastic bag.
2.2 Cable Management You can organize the cables by arranging them as shown in the illustration below: 90W USB 90W USB 2.3 Detaching the Stand (for VESA wall mount) The detachable stand of this monitor is specially designed for VESA wall mount. 1. Press the release button to detach the stand (arm) from the monitor. 2. Remove the stand. Then install the wall mount bracket on the rear of the monitor. • • The VESA wall mount kit (100 x 100 mm) is purchased separately.
2.4 Connecting the Cables Connect the cables as the following instructions: 90W USB 90W USB • To connect the power cord: a. Connect one end of the power cord to the monitor’s AC IN input and the other end to a power outlet. • To connect the DisplayPort/HDMI cable: a. Plug one end of the DisplayPort/HDMI cable to the monitor’s DisplayPort/ HDMI port. b. Connect the other end of the DisplayPort/HDMI cable to your computer's DisplayPort/HDMI port.
• To use the USB type-A/B ports: Take the supplied USB 3.2 cable, and plug the smaller end (type-B) of the USB upstream cable to the monitor’s USB upstream port, and the larger end (type-A) to your computer’s USB 3.2 port. Make sure your computer is installed with the lastest Windows 10/ Windows 11 operating system. That will enable the USB hub function on the monitor to work. • To use the USB type-C port: a. Plug one end of the USB type-C cable to the monitor’s USB type-C port. b.
2.6 Adjusting the Monitor • For optimal viewing, we recommend that you look at the full face of the monitor, then adjust the monitor to the angle that is most comfortable for you. • Hold the stand to prevent the monitor from falling when you change its angle. • You can adjust the monitor's angle from -5° to 20° and it allows 15° swivel adjustment from either left or right. You can also adjust the monitor's height within ±100 mm.
Chapter 3: General Instructions 3.1 OSD (On-Screen Display) Menu 3.1.1 How to Reconfigure Use the control buttons on the monitor to navigate through the menu and make adjustments. ROG SWIFT PG49WCD 5120 x 1440 Gaming Image 144Hz GameVisual Racing Mode Input Source DisplayPort HDR OFF Variable Refresh Rate GamePlus GameVisual Shadow Boost Color Input Select PIP/PBP Volume 50 Back Enter Exit To navigate through the menu and make adjustments, do the following: 1.
3.1.2 1. OSD Function Introduction Gaming Configure your gaming preferences.
2. Image Configure the image settings. ROG SWIFT PG49WCD 5120 x 1440 Gaming Image Color Input Select Brightness 144Hz GameVisual Racing Mode Input Source DisplayPort HDR OFF 65 Uniform Brightness Contrast 80 VividPixel 50 HDR Setting Aspect Control Blue Light Filter PIP/PBP Volume 50 Back Enter Exit • Brightness: Adjust the brightness level.
Please refer to the following to alleviate eye strains: • Users should take some time away from the display if working for long hours. It is advised to take short breaks (at least 5 mins) after around 1 hour of continuous working at the computer. Taking short and frequent breaks is more effective than a single longer break. To minimize eye strain and dryness in your eyes, users should rest the eye periodically by focusing on objects that are far away. Eye exercises can help to reduces eye strain.
4. Input Select Select your desired input source and toggle the Auto Input Detection function between on and off. The monitor input source will not automatically switch when the Auto Input Detection function is disabled. ROG SWIFT PG49WCD 5120 x 1440 Gaming Image 144Hz GameVisual Racing Mode Input Source DisplayPort HDR OFF Auto Input Detection USB Type-C DisplayPort HDMI Color Input Select PIP/PBP Volume 50 5. Back Enter Exit PIP/PBP Configure the multi-picture related settings.
6. Lighting Effect Adjust the color of the RGB LED and select different lighting effects. ROG SWIFT PG49WCD 5120 x 1440 Lighting Effect 144Hz GameVisual Racing Mode Input Source DisplayPort HDR OFF Aura Sync Aura RGB MyFavorite System Setup Volume 50 Back Enter Exit • Aura Sync: Allows you to turn on or off the Aura Sync function that synchronizes the Aura RGB light effect among all supported devices.
8. System Setup Adjust the system configurations. ROG SWIFT PG49WCD 5120 x 1440 Lighting Effect MyFavorite System Setup 144Hz GameVisual Racing Mode Input Source DisplayPort HDR OFF Language Sound USB Setup Power Indicator Power Key Lock Key Lock Power Setting OSD Setup Volume 50 Back • Language: Select the OSD language. • Sound: Configure the sound related settings. • Enter Exit • Volume: Adjust the volume level. • Mute: Enable/Disable the mute function.
• Power Setting: Select the power setting mode. If the setting is set to Standard Mode, it may result in higher power consumption. On the other hand, if the setting is set to Power Saving Mode, it may cause limited luminance performance. Power Setting Standard mode setting may result in higher power consumption. Power saving mode may cause limited luminance performance. Would you like to switch to Standard mode? YES NO • • 3-8 OSD Setup: Configure the OSD menu related settings.
3.2 Specifications Earphone jack SPDIF out OLED 49'' (32:9) 5120 x 1440 0.233 x 0.233 mm 250nits, 1000nits (peak) 1,500,000:1 178°(H)/178°(V) 1073.7M (10 bit) 0.03ms(GTG) 8 color temperatures No DisplayPort v1.4 x1, HDMI v2.1 x1, USB Type-B x1, USB 2.0 downstream port x2, USB 3.2 Gen 1 downstream port x2, USB Type-C x1 Yes Yes Speaker (Built-in) No USB3.2 Gen 1 port USB2.0 port Colors Downstream x 2 (5V/1.
Multi-languages Accessories Compliance and Standards 23 languages (English, French, German, Italian, Spanish, Dutch, Portuguese, Russian, Czech, Croatian, Polish, Romanian, Hungarian, Turkish, Simplified Chinese, Traditional Chinese, Japanese, Korean, Persian, Thai, Indonesian, Ukrainian, Vietnamese) Monitor base, Monitor hinge, Power cord, Warranty card, QSG, Ultra-High Speed HDMI Cable, DisplayPort Cable, USB3.
3.
3.4 Troubleshooting (FAQ) Problem Power LED is not ON Possible Solution • Press the on. button to check if the monitor is turned • Check if the power cord is properly connected to the monitor and the power outlet. • Check the Power Indicator function in the OSD menu. Select “ON“ to turn on the power LED. The power LED lights white and there is no screen image • Check if the monitor and the computer are turned on. • Make sure the signal cable is properly connected the monitor and the computer.
3.
HDMI DP USB Type-C 5120x1440@120Hz 2560x1440@60Hz 2560x1440@60Hz 5120x1440@75Hz 3440x1440@60Hz 3440x1440@60Hz 3840x2160@120Hz 2560x1440@120Hz 2560x1440@120Hz 2560x1440@120Hz 5120x1440@144Hz 5120x1440@144Hz 5120x1440@120Hz 5120x1440@120Hz 5120x1440@75Hz 5120x1440@75Hz 5120x1440@60Hz 5120x1440@60Hz * Modes not listed in the table may not be supported. For optimal resolution, we recommend that you choose a mode listed in the table above.
