User Guide

1-3ASUS 360Hz PG259QN/PG259QNR Series LCD Monitor

button

• Default: GameVisual.

• To change the shortcut function, go to the Shortcut > Shortcut 2

menu.

• Turns on the OSD menu when the monitor enters standby mode or

displays the “NO SIGNAL“ message.

5. Power button/power indicator

• Turns the monitor on/off.

• The color definition of the power indicator is as the below table.

Status Description

White ON

OFF OFF

Yellow ULMB/ ULMB+HDR

Amber ashing Entering standby mode

Amber Standby mode/No signal

Green HDR/HDR+G-SYNC

Red G-SYNC

6. Ambient light sensor.

1.3.2 Back view

PG259QN

PG259QNR

4 5 86 9

4 5 86 7 9

1. DC IN port. This port connects the power cord.

2. HDMI port. This port is for connection with an HDMI compatible device.

3. DisplayPort. This port is for connection for a DisplayPort compatible device.

4. For service personnel only.

5. USB 3.0 upstream port. This port is for connection with a USB upstream

cable. The connection enables the USB ports on the monitor.

6. USB 3.0 downstream ports. These ports are for connection with USB

devices, such as USB keyboard/mouse, USB flash drive, etc.