User’s Manual

2-14
Chapter 2: Basic Installation
Chapter 2
4. Remove the plastic film from the thermal pads on the bottom of the heatsinks.
If the thermal pad on the M.2 heatsink becomes damaged, we recommend replacing it
with the bundled thermal pad or a thermal pad with a thickness of 1.25mm.
5. Replace the heatsinks.
6. Secure the heatsinks using the screws on the heatsinks.
5
5
5
6 6
6 6
6
6
4
Installing the Massive Bundled PCIe
®
5.0 M.2 Heatsink
The Massive Bundled PCIe
®
5.0 M.2 Heatsink allows you to install two Gen5 SSDs whilst
still achieving optimal heat dissipation, providing users with a flexible and friendly DIY
experience. To install the Massive Bundled PCIe
®
5.0 M.2 Heatsink:
1. Completely loosen the screws on the heatsink.
2. Lift and remove the heatsink.