User Manual
Table Of Contents
- 1. Knowing BIOS
- 2. BIOS setup program
- 3. My Favorites
- 4. Main menu
- 5. Ai Tweaker menu
- 6. Advanced menu
- 6.1 Trusted Computing
- 6.2 AMD fTPM configuration
- 6.3 CPU Configuration
- 6.4 PCI Subsystem Settings
- 6.5 USB Configuration
- 6.6 Network Stack Configuration
- 6.7 NVMe Configuration
- 6.8 HDD/SSD SMART Information
- 6.9 SATA Configuration
- 6.10 APM Configuration
- 6.11 Onboard Devices Configuration
- 6.12 NB Configuration
- 6.13 AMD CBS
- 6.14 AMD PBS
- 6.15 AMD Overclocking
- 6.16 RAIDXpert2 Configuration Utility
- 7. Monitor menu
- 8. Boot menu
- 9. Tool menu
- 10. Exit menu
- 11. Updating BIOS
64
ROG STRIX X670E Series BIOS Manual
Damage caused by use of your AMD processor outside of specification or in excess of
factory settings are not covered by your system manufacturers warranty.
The following items appear only when [Accept] is selected for DRAM Timing
Configuration.
Manual CPU Overclocking
CPU Frequency
Specifies a custom CPU core frequency. Should be combined with a custom CPU
voltage. Power saving features for idle cores (e.g. cc6 sleep) remain active.
CPU Voltage
Specifies a custom CPU core voltage (mV). Should be combined with a custom CPU
voltage. Power saving features for idle cores (e.g. cc6 sleep) remain active. Stepping
is 5mV
CPU Core Count Control
CCD 00 Bit Map Down Core Control
Setting this item to 1 means core is enabled, setting this item to 0 means core is software
down.
Bit Map Down Core Discard Changes
Discard changes.
Bit Map Down Core Apply Changes
Check and apply changes, need to make sure core number is equaled in each CCD.
6.15 AMD Overclocking
The items in this menu shows the AMD Overclocking Setup page.