User Manual
Table Of Contents
- 1. Knowing BIOS
- 2. BIOS setup program
- 3. My Favorites
- 4. Main menu
- 5. Ai Tweaker menu
- 6. Advanced menu
- 6.1 Trusted Computing
- 6.2 AMD fTPM configuration
- 6.3 CPU Configuration
- 6.4 PCI Subsystem Settings
- 6.5 USB Configuration
- 6.6 Network Stack Configuration
- 6.7 NVMe Configuration
- 6.8 HDD/SSD SMART Information
- 6.9 SATA Configuration
- 6.10 APM Configuration
- 6.11 Onboard Devices Configuration
- 6.12 NB Configuration
- 6.13 AMD CBS
- 6.14 AMD PBS
- 6.15 AMD Overclocking
- 6.16 RAIDXpert2 Configuration Utility
- 7. Monitor menu
- 8. Boot menu
- 9. Tool menu
- 10. Exit menu
- 11. Updating BIOS
ROG STRIX X670E Series BIOS Manual
49
SMU and PSP Debug Mode
When this item is set to [Enabled], uncorrected errors detected by the PSP FW or
SMU FW that should cause a cold reset, will hang and not restart the system.
Configuration options: [Disabled] [Enabled] [Auto]
PPIN Opt-in
Allows you to turn on PPIN feature.
Configuration options: [Disabled] [Enabled] [Auto]
Enhanced REP MOVSB/STOSB
This item is set to 1 by default, but can be set to zero for analysis purposes as long as
OS supports it.
Configuration options: [Disabled] [Enabled]
REP-MOV/STOS Streaming
Allow REP-MOV/STOS to use non-caching streaming store for large sizes.
Configuration options: [Disabled] [Enabled]
Power Supply Idle Control
Configuration options: [Low Current Idle] [Typical Current Idle] [Auto]
Xtrig7 Workaround
This workaround is only applicable for Rev A. For Rev A, by default (Auto), the
Bronze workaround is applied. For Rev B, no workaround is applied and changing the
selection for this option will not result in any changes.
[Auto]
Bronze workaround is applied.
[No Workaround] No workaround is applied.
[Bronze Workaround] DbReq and PDM function as expected, breakpoint redirect
capability compromised.
[Silver Workaround] DbReq, PDM, and breakpoint redirect function as expected,
SCAN capability compromised.
SNP Memory (RMP Table) Coverage
When this item is set to [Enabled], the ENTIE system memory is covered.
Configuration options: [Disabled] [Enabled] [Custom] [Auto]
The following item appears only when SNP Memory (RMP Table) Coverage is set to
[Custom].
Amount of Memory to Cover
Specify MB of System Memory to be covered in Hex.
Configuration options: [0] - [100000]
SMEE
Control secure memory enryption enable.
Configuration options: [Disable] [Enable] [Auto]
Action on BIST Failure
Allows you to set the action to take when a CCD BIST failure is detected.
Configuration options: [Do nothing] [Down-CCD] [Auto]