User Manual

20
ROG STRIX X670E Series BIOS Manual
Calibrated Temperature Threshold to switch back
Set this threshold to control when the CPU returns to default mode. When CPU
Calibrated Temperature is bigger than this threshold, CPU returns to default. Likewise,
when temperature is smaller than this threshold AND current is bigger than Current
Threshold, CPU slips into OC Mode. In Celsius Unit.
Configuration options: [Auto] [0] - [140]
Hysteresis
Higher numbers increase the time required to persist in state when crossing
thresholds before switching. Set to 0 for fastest reaction and increase this to require
longer times to remain said state before activation.
Configuration options: [Auto] [0] - [255]
DRAM Timing Control
The sub-items in this menu allow you to set the DRAM timing control features. Use the
<+> and <-> keys to adjust the value. To restore the default setting, type [Auto] using the
keyboard and press the <Enter> key. You can also select various Memory Presets to load
settings suitably tuned for some memory modules.
Changing the values in this menu may cause the system to become unstable! If this
happens, revert to the default settings.
Primary Timings
DRAM CAS# Latency
Configuration options: [Auto] [2] - [64]
DRAM RAS# to CAS# Delay
Configuration options: [Auto] [1] - [63]
DRAM RAS# PRE Time
Configuration options: [Auto] [1] - [63]
DRAM RAS# ACT Time
Configuration options: [Auto] [1] - [127]
Secondary Timings
DRAM Row Cycle Time
Configuration options: [Auto] [1] - [255]
DRAM WRITE to READ Delay
Configuration options: [Auto] [2] - [126]
DRAM REF Cycle Time
Configuration options: [Auto] [1] - [4095]
Trfc2
Configuration options: [Auto] [1] - [4095]
Trfcsb
Configuration options: [Auto] [1] - [2047]
DRAM READ to PRE Time
Configuration options: [Auto] [1] - [31]