User’s Manual

2-10
Chapter 2: Basic Installation
Chapter 2
E. Install your M.2 to the M.2 slot.
F. Rotate the M.2 Q-Latch clockwise to secure the M.2 in place.
• To install an M.2 to M.2_2 and M.2_4 slot
For 2280 length
A. (optional) Install the bundled rubber for M.2 if you are installing a single
sided M.2 storage device. DO NOT install the bundled rubber for M.2 when
installing a double-sided M.2 storage device. The rubber installed by default
is compatible with double sided M.2 storage devices.
B. Rotate and adjust the M.2 Q-latch so that the handle points away from the
M.2 slot.
C. Install your M.2 to the M.2 slot.
D. Rotate the M.2 Q-Latch clockwise to secure the M.2 in place.
OPTIONAL
Bundled rubber for M.2