User Manual
Table Of Contents
- 1. Knowing BIOS
- 2. BIOS setup program
- 3. My Favorites
- 4. Main menu
- 5. Ai Tweaker menu
- 6. Advanced menu
- 6.1 Trusted Computing
- 6.2 AMD fTPM configuration
- 6.3 CPU Configuration
- 6.4 PCI Subsystem Settings
- 6.5 USB Configuration
- 6.6 Network Stack Configuration
- 6.7 NVMe Configuration
- 6.8 HDD/SSD SMART Information
- 6.9 SATA Configuration
- 6.10 APM Configuration
- 6.11 Onboard Devices Configuration
- 6.12 NB Configuration
- 6.13 AMD CBS
- 6.14 AMD PBS
- 6.15 AMD Overclocking
- 6.16 RAIDXpert2 Configuration Utility
- 7. Monitor menu
- 8. Boot menu
- 9. Tool menu
- 10. Exit menu
- 11. Updating BIOS
ROG STRIX X670E Series BIOS Manual
57
DDR Security
This item allows you to configure DDR Security.
TSME
Configuration options: [Auto] [Enabled] [Disabled]
Data Scramble
Configuration options: [Enabled] [Disabled] [Auto]
DDR Addressing Options
This item allows you to configure DDR Addressing Options.
Chipselect Interleaving
Interleave memory blocks across the DRAM chip selects for node 0.
Configuration options: [Disabled] [Auto]
Address Hash Bank
Configuration options: [Disabled] [Enabled] [Auto]
Address Hash CS
Configuration options: [Auto] [Enabled] [Disabled]
Address Hash Subchannel
Configuration options: [Auto] [Enabled] [Disabled]
BankSwapMode
Configuration options: [Auto] [Disabled] [SwapCPU] [Swap APU]
DDR Training Options
This item allows you to configure DDR Training Options.
DFE Read Training
Perform 2D Read Training with DFE on.
Configuration options: [Auto] [Enable] [Disable]
DRAM PDA
Enumerate ID Programming Mode
Configuration options: [Auto] [Sequential PDA enumeration mode] [Legacy
PDA enumeration mode]
TX DFE Taps
Specifies the number of TX DFE taps.
Configuration options: [Auto] [1 Tap] [2 Taps] [3 Taps] [4 Taps]
PPT Control
Configuration options: [Auto] [Disabled]
DDR Memory MBIST
This item allows you to configure DDR Memory MBIST.
MBIST Enable
Allows you to enable or disable Memory MBIST.
Configuration options: [Disabled] [Enabled] [Auto]
The following items appear only when
MBIST Enable is set to [Enabled].
MBIST Test Mode
Allows you to select the MBIST Test Mode - Interface Mode (Tests Single and
Multiple CS transactions and Basic Connectivity) or Data Eye Mode (Measures
Voltage vs. Timing).
Configuration options: [Interface Mode] [Data Eye Mode] [Both] [Auto]
MBIST Aggressors
Configuration options: [Disabled] [Enabled] [Auto]