User Manual

ROG STRIX X670E Series BIOS Manual
27
VDDSOC Current Capability
Configuration options: [Auto] [100%] [110%] [120%] [130%] [140%]
VDDSOC Current Reporting Scale
The scale for the current reported to the CPU via the SVI Bus.
Configuration options: [Auto] [100%] [75%] [50%] [25%]
VDDSOC Switching Frequency
Configuration options: [Auto] [Manual]
The following item appears only when VDDSOC Switching Frequency is set to [Manual].
Fixed VDDSOC VRM Switching Frequency(KHz)
The switching frequency will affect the VDDSOC transient response speed and the
component thermal production. Allows you to set a higher frequency for a quicker
transient response speed. The values range from 400 KHz to 700 KHz with an interval
of 100 KHz.
VDDSOC Power Phase Control
Configuration options: [Auto] [Standard] [Optimized] [Extreme] [Manual]
DO NOT remove the thermal module when setting this item to [Extreme]. The thermal
conditions should be monitored.
The following item appears only when VDDSOC Power Phase Control is set to [Manual].
Power Phase Response
Select ultra fast mode for a faster power phase response. The reaction time will be
longer when regular mode is selected.
Configuration options: [Ultra Fast] [Fast] [Medium] [Regular]
Performance Bias
Different Values may help different Software’s performance.
Configuration options: [Auto] [None] [CB R23] [GB3]
Tweaker’s Paradise
Clock Spread Spectrum
Configuration options: [Auto] [Enabled] [Disabled]
BCLK1 Amplitude
Sets the signal magnitude of the reference BCLK1 supplied to the processor. Higher
values may improve overclocking stability.
Configuration options: [Auto] [800mV] [900mV]
BCLK1 Slew Rate
The speed at which the base clock rises or falls. Set a high value for overclocking
stability.
Configuration options: [Auto] [Slow] [Fast]