User Manual
Table Of Contents
- 1. Knowing BIOS
- 2. BIOS setup program
- 3. My Favorites
- 4. Main menu
- 5. Ai Tweaker menu
- 6. Advanced menu
- 6.1 Trusted Computing
- 6.2 AMD fTPM configuration
- 6.3 CPU Configuration
- 6.4 PCI Subsystem Settings
- 6.5 USB Configuration
- 6.6 Network Stack Configuration
- 6.7 NVMe Configuration
- 6.8 HDD/SSD SMART Information
- 6.9 SATA Configuration
- 6.10 APM Configuration
- 6.11 Onboard Devices Configuration
- 6.12 NB Configuration
- 6.13 AMD CBS
- 6.14 AMD PBS
- 6.15 AMD Overclocking
- 6.16 RAIDXpert2 Configuration Utility
- 7. Monitor menu
- 8. Boot menu
- 9. Tool menu
- 10. Exit menu
- 11. Updating BIOS
ROG STRIX X670E Series BIOS Manual
19
FCLK Frequency
Configuration options: [Auto] [800MHz] - [3000MHz]
Core Performance Boost
Automatically overclocks the CPU and DRAM to enhance system performance.
Configuration options: [Auto] [Enabled] [Disabled]
CPU Core Ratio
Configuration options: [Auto] [CPU Core Ratio] [AI Optimized]
The following item appears only when CPU Core Ratio is set to [CPU Core Ratio].
CPU Core Ratio
Use the <+> or <-> to adjust the value. The values range from 80.0 to 100.0 with an interval
of 0.25.
Configuration options: [Auto] [8.00] - [100.00]
The following item appears only when CPU Core Ratio is set to [AI Optimized].
Preference
[Performance] Better overall performance.
[Power Efficient] More energy saving.
CPU Core Ratio (Per CCX)
The sub-items in this menu allow you to adjust Core Ratios for each CCX.
Core VID
Allows you to specify a custom CPU core VID. Power saving features for idle cores
(e.g. cc6 sleep) remain active.
Configuration options: [Auto] [0.700] - [1.700]
CCD0
CCX0 Ratio
Allows you to specify a custom Core Ratio for this CCX.
Configuration options: [Auto] [12.00] - [100.00]
Dynamic OC Switcher
Enabling this dynamically switches back and forth between OC mode and Default
modes based on current and temperature threshold specified.
Configuration options: [Auto] [Disabled] [Enabled]
The following items appear only when Dynamic OC Switcher is set to [Enabled].
Current Threshold to Switch to OC Mode
Set this threshold to control when the CPU goes into OC Mode and when it comes
back to default. Bigger than this value = OC Mode, smaller than this value = Default
Mode. We recommend a value of 40A for single CCD and 60A for two CCDs.
Configuration options: [Auto] [0] - [255]