User Manual

1-14
Chapter 1: Product Introduction
Chapter 1
6. Addressable Gen2 LED connector
TheAddressableGen2LEDconnectorallowsyoutoconnectindividuallyaddressable
RGBWS2812BLEDstripsorWS2812BbasedLEDstrips.
TheAddressableGen2LEDconnectorsupportsWS2812BaddressableRGBLEDstrips
(5V/Data/Ground),withamaximumpowerratingof3A(5V)andamaximumof60LEDs.
Beforeyouinstallorremoveanycomponent,ensurethatthepowersupplyisswitchedoff
orthepowercordisdetachedfromthepowersupply.Failuretodosomaycausesevere
damagetothemotherboard,peripherals,orcomponents.
• ActuallightingandcolorwillvarywithLEDstrip.
• IfyourLEDstripdoesnotlightup,checkiftheaddressableRGBLEDstripis
connectedinthecorrectorientation,andthe5Vconnectorisalignedwiththe5V
headeronthemotherboard.
• TheaddressableRGBLEDstripwillonlylightupwhenthesystemispoweredon.
• TheaddressableRGBLEDstripispurchasedseparately.