Motherboard ROG STRIX X570-I GAMING
E15891 Revised Edition V2 September 2019 Copyright © 2019 ASUSTeK COMPUTER INC. All Rights Reserved. No part of this manual, including the products and software described in it, may be reproduced, transmitted, transcribed, stored in a retrieval system, or translated into any language in any form or by any means, except documentation kept by the purchaser for backup purposes, without the express written permission of ASUSTeK COMPUTER INC. (“ASUS”).
Contents Safety information....................................................................................................... vi About this guide......................................................................................................... vii ROG STRIX X570-I GAMING specifications summary............................................. ix Package contents......................................................................................................
Chapter 3: Knowing BIOS............................................................................................. 3-1 3.2 BIOS setup program................................................................................... 3-2 3.2.1 Advanced Mode........................................................................... 3-3 3.2.2 EZ Mode...................................................................................... 3-6 3.2.3 Q-Fan Control...................................................
Chapter 4: 4.1 RAID Support AMD RAID Array configurations................................................................ 4-1 4.1.1 RAID definitions........................................................................... 4-1 Appendix Notices ..................................................................................................................... A-1 ASUS contact information.......................................................................................
Safety information Electrical safety • To prevent electrical shock hazard, disconnect the power cable from the electrical outlet before relocating the system. • When adding or removing devices to or from the system, ensure that the power cables for the devices are unplugged before the signal cables are connected. If possible, disconnect all power cables from the existing system before you add a device.
About this guide This user guide contains the information you need when installing and configuring the motherboard. How this guide is organized This guide contains the following parts: • Chapter 1: Product Introduction This chapter describes the features of the motherboard and the new technology it supports. It includes description of the switches, jumpers, and connectors on the motherboard.
Conventions used in this guide To ensure that you perform certain tasks properly, take note of the following symbols used throughout this manual. DANGER/WARNING: Information to prevent injury to yourself when trying to complete a task. CAUTION: Information to prevent damage to the components when trying to complete a task. IMPORTANT: Instructions that you MUST follow to complete a task. NOTE: Tips and additional information to help you complete a task.
ROG STRIX X570-I GAMING specifications summary CPU AMD AM4 Socket for 3rd and 2nd Gen AMD Ryzen™ / 2nd and 1st Gen AMD Ryzen™ with Radeon™ Vega Graphics Processors * Refer to www.asus.com for the AMD CPU support list. Chipset AMD X570 Chipset 3rd Gen AMD Ryzen™ Processors 2 x DIMM, max. 64GB, DDR4 4800(O.C.) / 4600(O.C.) / 4400(O.C.) / 4266(O.C.) / 4133(O.C.) / 4000(O.C.) / 3800(O.C.) / 3600(O.C.) / 3466(O.C.) / 3400(O.C.
ROG STRIX X570-I GAMING specifications summary 3rd Gen AMD Ryzen™ Processors -1xM .2_1 Socket 3 with M Key, type 2242/2260/2280 (PCIE 4.0 x4 and SATA modes) storage devices support 2nd Gen AMD Ryzen™ / 2nd and 1st Gen Ryzen™ with Radeon™ Vega Graphics Processors Storage -1xM .2_1 Socket 3 with M Key, type 2242/2260/2280 (PCIE 3.0 x4 and SATA modes) storage devices support AMD X570 Chipset -1xM .2_2 Socket 3 with M Key, type 2242/2260/2280 (PCIE 4.
ROG STRIX X570-I GAMING specifications summary Digi+ VRM - Power Stage - Alloy Chokes - 5K Black Metallic Capacitors ROG Exclusive Features RAMCache III GameFirst V Sonic Studio III +Sonic Studio Virtual Mixer Sonic Radar III CPU-Z ASUS Exclusive Features Armoury Crate - Aura Lighting Control, Aura Addressable Gen2 Header(s), Aura RGB Strip Headers, Aura Lighting Effects Synchronization with compatible ASUS ROG devices - AI Suite 3 ASUS Dual Intelligent Processors 5 - 5-way Optimization tuning key perfec
ROG STRIX X570-I GAMING specifications summary 4 x USB 3.2 Gen 2 ports (3 x Type-A [red] and 1 x Type-C™ ports at back panel) 4 x USB 3.2 Gen 1 ports [blue] 1 x HDMI 2.0 port 1 x DP 1.4 port Back I/O Ports 1 x Anti-surge LAN (RJ45) port 1 x ASUS Wi-Fi module (Wi-Fi 802.11 a/b/g/n/ac and Bluetooth v5.0) 3 x LED-illuminated audio jacks* * Use a chassis with HD audio module in the front panel to support an 8-channel audio output. 1 x USB 3.2 Gen 1 header supports additional 2 USB 3.
Package contents Check your motherboard package for the following items. Motherboard 1 x ROG STRIX X570-I GAMING motherboard 4 x SATA 6 Gb/s cables 1 x Addressable LED extension cable Cables 1 x Panel cable 1 x AAFP Extension Cable 1 x ASUS 2x2 dual band Wi-Fi moving antennas (Wi-Fi 802.11a/b/g/n/ac compliant) 1 x I/O shield Accessories 1 x ROG Strix sticker 1 x M.2 mounting kit 2 x M.
Installation tools and components 1 Bag of screws Phillips (cross) screwdriver PC chassis Power supply unit AMD AM4 CPU AMD AM4 compatible CPU Fan DDR4 DIMM SATA hard disk drive SATA optical disc drive (optional) Graphics card (optional) The tools and components in the table above are not included in the motherboard package.
Product Introduction Product Introduction 1.1 Motherboard overview 1.1.1 Before you proceed 1 Chapter 1 Chapter 1: Take note of the following precautions before you install motherboard components or change any motherboard settings. • Unplug the power cord from the wall socket before touching any component. • Before handling components, use a grounded wrist strap or touch a safely grounded object or a metal object, such as the power supply case, to avoid damaging them due to static electricity.
1.1.2 Motherboard layout Chapter 1 Refer to Internal connectors and Rear I/O connection for more information about rear panel connectors and internal connectors.
ROG STRIX X570-I GAMING Page 1-13 1-4 1-17 1-17 1-14 1-15 1-5 1-18 1-11 1-16 1-12 1-9 1-12 1-16 1-19 1-11 1-10 Chapter 1 Layout contents 1. Power connectors 2. AM4 CPU socket 3. HS Fan connector 4. Fan and Pump connectors 5. Addressable Gen2 LED connector 6. RGB LED connector 7. DDR4 DIMM slots 8. System Panel connector 9. SATA 6Gb/s connector 10. Thermal Sensor connector 11. USB 2.0 connector 12. Clear RTC RAM jumper 13. USB 3.2 Gen 1 connector 14. M.2 Heatsink Cover LED connector 15. M.2 slot 16.
1.1.3 Central Processing Unit (CPU) Chapter 1 The motherboard comes with an AMD AM4 Socket for 3rd, 2nd and 1st Gen AMD Ryzen™ , 2nd and 1st Gen AMD Ryzen™ with Radeon™ Vega Graphics, and Athlon™ with Radeon™ Vega Graphics Processors. 1-4 • The AM4 socket has a different pinout design. Ensure that you use a CPU designed for the AM4 socket. • The CPU fits in only one correct orientation. DO NOT force the CPU into the socket to prevent bending the connectors on the CPU and damaging the CPU.
1.1.4 System memory Chapter 1 The motherboard comes with Dual Inline Memory Modules (DIMM) slots designed for DDR4 (Double Data Rate 4) memory modules. A DDR4 memory module is notched differently from a DDR, DDR2, or DDR3 module. DO NOT install a DDR, DDR2, or DDR3 memory module to the DDR4 slot.
Memory configurations You may install 2 GB, 4 GB, 8 GB, 16 GB, or 32 GB unbuffered and non‑ECC DDR4 DIMMs into the DIMM sockets. Chapter 1 1-6 • You may install varying memory sizes in Channel A and Channel B. The system maps the total size of the lower-sized channel for the dual-channel configuration. Any excess memory from the higher-sized channel is then mapped for single-channel operation. • AMD Ryzen™ processors support non-ECC un-buffered memory.
1.1.5 Expansion slots Chapter 1 Unplug the power cord before adding or removing expansion cards. Failure to do so may cause you physical injury and damage motherboard components. Slot No. 1 Slot Description PCIe 4.0/3.
PCIe operating mode 3rd Gen AMD Ryzen™ Processors Chapter 1 Slot Description PCIe x16 M.2_1 (PCIe Mode) M.2_1 (SATA Mode) M.2_2 (PCIe Mode) M.2_2 (SATA Mode) PCIe operating mode x16 (PCIe 4.0) x4 (PCIe 4.0) Support x4 (PCIe 4.0) Support 2nd Gen AMD Ryzen™ Processors Slot Description PCIe x16 M.2_1 (PCIe Mode) M.2_1 (SATA Mode) M.2_2 (PCIe Mode) M.2_2 (SATA Mode) PCIe operating mode x16 (PCIe 3.0) x4 (PCIe 4.0) Support x4 (PCIe 3.
1.1.6 1. Jumper Clear RTC RAM jumper Chapter 1 The Clear RTC RAM jumper allows you to clear the Real Time Clock (RTC) RAM in the CMOS, which contains the date, time, system passwords, and system setup parameters. To erase the RTC RAM: 1. Turn OFF the computer and unplug the power cord. 2. Short-circuit pin 1-2 with a metal object or jumper cap for about 5-10 seconds. 3. Plug the power cord and turn ON the computer. 4.
1.1.7 1. Onboard LEDs POST State LEDs Chapter 1 The POST State LEDs check key components (CPU, DRAM, VGA, and booting devices) during the motherboard booting process. If an error is found, the critical component’s LED stays lit up until the problem is solved. The POST State LEDs provide the most probable cause of an error code as a starting point for troubleshooting. The actual cause may vary from case to case. 2.
1.1.8 1. Internal connectors SATA 6Gb/s connector Chapter 1 The SATA 6Gb/s connector allows you to connect SATA devices such as optical disc drives and hard disk drives via a SATA cable. If you installed SATA storage devices, you can create a RAID 0, 1, and 10 configuration through the onboard AMD X570 chipset. 2. • The connectors are set to [AHCI Mode] by default. If you intend to create a SATA RAID set using these connectors, set the SATA Mode item in the BIOS to [RAID].
3. USB 3.2 Gen 1 connector The USB 3.2 Gen 1 connector allows you to connect a USB 3.2 Gen 1 module for additional USB 3.2 Gen 1 ports. The USB 3.2 Gen 1 connector provides data transfer speeds of up to 5 Gb/s. Chapter 1 The USB 3.2 Gen 1 module is purchased separately. The plugged USB 3.2 Gen 1 device may run on xHCI or EHCI mode depending on the operating system’s setting. 4. USB 2.0 connector The USB 2.0 connector allows you to connect a USB module for additional USB 2.0 ports. The USB 2.
5. Power connectors Chapter 1 These Power connectors allow you to connect your motherboard to a power supply. The power supply plugs are designed to fit in only one orientation, find the proper orientation and push down firmly until the power supply plugs are fully inserted. Ensure to connect the 8-pin power plug. • For a fully configured system, we recommend that you use a power supply unit (PSU) that complies with ATX 12V Specification 2.0 (or later version) and provides a minimum power of 350 W.
6. Addressable Gen2 LED connector The Addressable Gen2 LED connector allows you to connect individually addressable RGB WS2812B LED strips or WS2812B based LED strips. Chapter 1 The Addressable Gen2 LED connector supports WS2812B addressable RGB LED strips (5V/Data/Ground), with a maximum power rating of 3A (5V) and a maximum of 60 LEDs. Before you install or remove any component, ensure that the power supply is switched off or the power cord is detached from the power supply.
7. RGB LED connector Chapter 1 The RGB LED connector allows you to connect RGB LED strips. The RGB LED connector supports 5050 RGB multi-color LED strips (12V/G/R/B), with a maximum power rating of 3A (12V), and no longer than 3m. Before you install or remove any component, ensure that the power supply is switched off or the power cord is detached from the power supply. Failure to do so may cause severe damage to the motherboard, peripherals, or components.
8. M.2 Heatsink Cover LED connector The M.2 Heatsink Cover LED connector is for connecting the LED strips on your M.2 heatsink cover. Chapter 1 Be careful when connecting the M.2 heatsink cover to the M.2 Heatsink Cover LED connector. Ensure the LED connector on the M.2 heatsink cover is aligned with the M.2 Heatsink Cover LED connector before installing the M.2 heatsink cover. Failure to do so may cause damage to the connector pins. 9.
10. Fan and Pump connectors Chapter 1 The Fan and Pump connectors allow you to connect fans or pumps to cool the system. • DO NOT forget to connect the fan cables to the fan connectors. Insufficient air flow inside the system may damage the motherboard components. These are not jumpers! Do not place jumper caps on the fan connectors! • Ensure the cable is fully inserted into the connector. Connect the fan of your water cooling kit to the AIO_PUMP connector. Header CPU_FAN CHA_FAN AIO_PUMP 11.
12. System Panel connector The System Panel connector supports several chassis-mounted functions. Chapter 1 • System Power LED connector (PLED) The 2-pin connector allows you to connect the System Power LED. The System Power LED lights up when the system is connected to a power source, or when you turn on the system power, and blinks when the system is in sleep mode. • Storage Device Activity LED connector (HDLED) The 2-pin connector allows you to connect the Storage Device Activity LED.
13. M.2 slot Chapter 1 The M.2 slot allows you to install M.2 devices such as M.2 SSD modules. • For 3rd Gen AMD Ryzen™ Processors: - M.2_1 supports PCIE 4.0 x4 and SATA mode M Key design and type 2242 / 2260 / 2280 storage devices. • For 2nd Gen AMD Ryzen™ / 2nd and 1st Gen Ryzen™ with Radeon™ Vega Graphics Processors: - M.2_1 supports PCIE 3.0 x4 and SATA mode M Key design and type 2242 / 2260 / 2280 storage devices. • For AMD X570 Chipset: - M.2_2 supports PCIE 4.
To install a 2242 M.2 SSD module to M.2_2 socket: Chapter 1 1. Align the bigger hole on the mounting kit with the 2260 standoff and secure it with a screw. 2. Install the 2242 M.2 SSD module to the M.2_2 socket. 3. Secure the M.2 SSD module to the M.2_2 socket with a screw. 3 1 2 1-20 • For a 2242 storage device, use the bundled 2242 mounting kit. • Before installing a 2242 M.2 SSD module, ensure that the mounting kit is properly installed with the bigger screw hole on the 2260 standoff.
Chapter 2: Basic Installation Basic Installation 2.1 Building your PC system 2 The diagrams in this section are for reference only. The motherboard layout may vary with models, but the installation steps are the same for all models. 2.1.1 CPU installation ROG STRIX X570-I GAMING Chapter 2 The AMD AM4 socket is compatible with AMD AM4 processors. Ensure you use a CPU designed for the AM4 socket. The CPU fits in only one correct orientation.
2.1.2 Cooling system installation Apply the Thermal Interface Material to the CPU cooling system and CPU before you install the cooling system, if necessary.
Chapter 2 CPU heatsink and fan assembly Type 2 When using this type of CPU fan, remove the screws and the retention module only. Do not remove the plate on the bottom.
To install an AIO cooler Chapter 2 AIO_PUMP CPU_FAN CHA_FAN 2-4 Chapter 2: Basic Installation
Motherboard installation 1. Install the I/O Shield to the chassis rear I/O panel. 2. Place the motherboard into the chassis, ensuring that its rear I/O ports are aligned to the chassis’ rear I/O panel. ROG STRIX X570-I GAMING Chapter 2 2.1.
3. Place four (4) screws into the holes indicated by circles to secure the motherboard to the chassis. Chapter 2 DO NOT over tighten the screws! Doing so can damage the motherboard.
DIMM installation Chapter 2 2.1.
2.1.5 ATX power connection OR Chapter 2 Ensure to connect the 8-pin power plug. 2.1.
2.1.7 Front I/O connector To install the front panel connector To install USB 3.2 Gen 1 connector USB 3.2 Gen 1 Chapter 2 To install USB 2.0 connector USB 2.
To install front panel audio connector 1 2 Chapter 2 3 AAFP 5 2-10 4 Chapter 2: Basic Installation
2.1.
2.1.9 M.2 installation M.
Chapter 2 M.2_2 Socket (Bottom side) Supported M.2 type varies per motherboard.
2.1.10 Wi-Fi antenna installation Installing the ASUS 2x2 dual band W-Fi antennas Connect the bundled ASUS 2x2 dual band Wi-Fi antennas to the Wi-Fi ports at the back of the chassis. Chapter 2 • Ensure that the ASUS 2x2 dual band Wi-Fi antennas are securely installed to the Wi-Fi ports. • Ensure that the antennas are at least 20 cm away from all persons. The illustration above is for reference only.
2.
2.3 Motherboard rear and audio connections 2.3.1 Rear I/O connection Chapter 2 Rear panel connectors 1. DisplayPort 2. USB 3.2 Gen 2 port 9 3. USB 3.2 Gen 1 ports 5, 6, 7, 8 4. 5. 6. 7. 8. LAN (RJ-45) port* HDMI port USB 3.2 Gen 2 port C10 (Type-C™) USB 3.2 Gen 2 ports 3, 4 Wi-Fi 802.11 a/b/g/n/ac, Bluetooth V5.0 9. Color-coded LED Audio jacks** * and ** : Refer to the tables below for LAN port LEDs, and audio port definitions. 2-16 • USB 3.
* LAN ports LED indications Activity Link LED Speed LED Status Description Status Description Off No link Off Orange Linked Orange 100 Mbps connection Orange (Blinking) Data activity Orange (Blinking then steady) Green ACT/LINK SPEED LED LED 10 Mbps connection 1 Gbps connection Ready to wake up from S5 mode LAN port ** Audio 2, 4, 5.1 or 7.1-channel configuration Light Blue (Rear panel) Lime (Rear panel) Pink (Rear panel) Lime (Front panel) 2.3.2 Headset 4-channel 5.1-channel 7.
Connect to Stereo Speakers Connect to 2-channel Speakers Chapter 2 Connect to 4-channel Speakers 2-18 Chapter 2: Basic Installation
Chapter 2 Connect to 5.1-channel Speakers Connect to 7.
2.4 Starting up for the first time 1. After making all the connections, replace the system case cover. 2. Ensure that all switches are off. 3. Connect the power cord to the power connector at the back of the system chassis. 4. Connect the power cord to a power outlet that is equipped with a surge protector. 5. Turn on the devices in the following order: 6. a. Monitor b. External storage devices (starting with the last device on the chain) c.
Chapter 3: BIOS Setup BIOS Setup 3.1 Knowing BIOS 3 The new ASUS UEFI BIOS is a Unified Extensible Interface that complies with UEFI architecture, offering a user-friendly interface that goes beyond the traditional keyboardonly BIOS controls to enable a more flexible and convenient mouse input. You can easily navigate the new UEFI BIOS with the same smoothness as your operating system. The term “BIOS” in this user manual refers to “UEFI BIOS” unless otherwise specified.
3.2 BIOS setup program Use the BIOS Setup to update the BIOS or configure its parameters. The BIOS screen include navigation keys and brief onscreen help to guide you in using the BIOS Setup program. Entering BIOS at startup To enter BIOS Setup at startup, press or during the Power-On Self Test (POST). If you do not press or , POST continues with its routines. Entering BIOS Setup after POST To enter BIOS Setup after POST: • Press ++ simultaneously.
3.2.1 Advanced Mode The Advanced Mode provides advanced options for experienced end-users to configure the BIOS settings. The figure below shows an example of the Advanced Mode. Refer to the following sections for the detailed configurations. The default screen for entering the BIOS setup program can be changed. Refer to the Setup Mode item in section Boot menu for details.
Menu bar The menu bar on top of the screen has the following main items: My Favorites For saving the frequently-used system settings and configuration. Main For changing the basic system configuration Ai Tweaker For changing the overclocking settings Advanced For changing the advanced system settings Monitor For displaying the system temperature, power status, and changing the fan settings.
Search (F9) This button allows you to search for BIOS items by entering its name, enter the item name to find the related item listing. AURA (F4) This button allows you to turn the RGB LED lighting or functional LED on or off. [ON] All AURA effects will be enabled. (Default mode) [OFF] All AURA effects will be disabled. [Stealth Mode] Functional LEDs (F-Panel) and all AURA effects will be disabled.
3.2.2 EZ Mode The EZ Mode provides you an overview of the basic system information, and allows you to select the display language, system performance, mode and boot device priority. To access the Advanced Mode, select Advanced Mode or press the hotkey for the advanced BIOS settings. To switch from Advanced Mode to EZ Mode, click EZ Mode(F7) or press the hotkey. Displays a quick overview of the system status Displays the system properties of the selected mode.
3.2.3 Q-Fan Control The QFan Control allows you to set a fan profile or manually configure the operating speed of your CPU and chassis fans.
Configuring fans manually Select Manual from the list of profiles to manually configure your fans’ operating speed. Speed points Select to manually configure your fans To configure your fans: Chapter 3 3-8 1. Select the fan that you want to configure and to view its current status. 2. Click and drag the speed points to adjust the fans’ operating speed. 3. Click Apply to save the changes then click Exit (ESC).
3.2.4 EZ Tuning Wizard EZ Tuning Wizard allows you to easily overclock your CPU and DRAM, computer usage, and CPU fan to their best settings. OC Setup OC Tuning 1. Press on your keyboard or click EZ Tuning Wizard(F11) from the BIOS screen to open EZ Tuning Wizard screen. 2. Click OC then click Next. 3. Select a PC scenario Daily Computing or Gaming/Media Editing, then click Next.
4. Select a Main Cooling System BOX cooler, Tower cooler, Water cooler, or I’m not sure, then click Next. 5. After selecting the Main Cooling System, click Next then click Yes to start the OC Tuning.
3.3 My Favorites My Favorites is your personal space where you can easily save and access your favorite BIOS items. ROG STRIX X570-I GAMING Chapter 3 My Favorites comes with several performance, power saving, and fast boot related items by default. You can personalize this screen by adding or removing items.
Adding items to My Favorites To add BIOS items: 1. Press on your keyboard or click MyFavorite(F3) from the BIOS screen to open Setup Tree Map screen. 2. On the Setup Tree Map screen, select the BIOS items that you want to save in My Favorites screen. Main menu panel Selected shortcut items Submenu panel Delete all favorite items Recover to default favorite items 3. Select an item from main menu panel, then click the submenu that you want to save or press on your keyboard.
3.4 Main menu The Main menu screen appears when you enter the Advanced Mode of the BIOS Setup program. The Main menu provides you an overview of the basic system information, and allows you to set the system date, time, language, and security settings. Security The Security menu items allow you to change the system security settings. 3.5 • If you have forgotten your BIOS password, erase the CMOS Real Time Clock (RTC) RAM to clear the BIOS password.
3.6 Advanced menu The Advanced menu items allow you to change the settings for the CPU and other system devices. Be cautious when changing the settings of the Advanced menu items. Incorrect field values can cause the system to malfunction. 3.6.1 AMD fTPM configuration The items in this menu show the AMD fTPM configuration options. AMD fTPM switch This item allows you to enable or disable AMD CPU firmware TPM.
3.6.3 SATA Configuration While entering Setup, the BIOS automatically detects the presence of SATA devices. The SATA Port items show Not Present if no SATA device is installed to the corresponding SATA port. SATA Port Enable This item allows you to enable or disable the SATA Device. Configuration options: [Disabled] [Enabled] The following item appears only when SATA Port Enable to [Enabled]. SATA Mode This item allows you to set the SATA configuration.
3.6.4 Onboard Devices Configuration The items in this menu allow you to switch between PCIe Lanes and configure onboard devices. HD Audio Controller This item allows you to use the Azalia High Definition Audio Controller. Configuration options: [Disabled] [Enabled] Audio LED Lighting This item allows you to turn the RGB LED lighting for the Audio Jack LED on or off. [Disabled] The audio jack LEDs will not light up. [Auto] The audio jack LEDs will light up.
3.6.5 APM Configuration The items in this menu allow you to set system wake and sleep settings. ErP Ready [Disabled] This item allows you to switch off some power at S4+S5 or S5 to get the system ready for ErP requirement. When set to [Enabled], all other PME options are switched off. Configuration options: [Disabled] [Enable(S4+S5)] [Enable(S5)] Restore On AC Power Loss This item allows your system to go to ON state, OFF state, or both states after an AC power loss.
3.6.7 USB Configuration The items in this menu allow you to change the USB-related features. The Mass Storage Devices item shows the auto-detected values. If no USB device is detected, the item shows None. Legacy USB Support [Enabled] Your system supports the USB devices in legacy operating systems. [Disabled] Your USB devices can be used for BIOS setup only and cannot be recognized in the boot devices list. [Auto] Your system automatically detects the presence of USB devices at startup.
3.6.12 AMD Overclocking The items in this menu allow you to configure the AMD Overclocking Setup Page. 3.7 Monitor menu The Monitor menu displays the system temperature/power status, and allows you to change the fan settings. Scroll down to display the other BIOS items. Q-fan Configuration Qfan Tuning Click this item to automatically detect the lowest speed and configure the minimum duty cycle for each fan. 3.8 Boot menu The Boot menu items allow you to change the system boot options.
CSM (Compatibility Support Module) This item allows you to configure the CSM (Compatibility Support Module) items to fully support the various VGA, bootable devices and add-on devices for better compatibility. Launch CSM [Auto] The system automatically detects the bootable devices and the addon devices. [Enabled] For better compatibility, enable the CSM to fully support the nonUEFI driver add-on devices or the Windows® UEFI mode.
3.9 Tool menu The Tool menu items allow you to configure options for special functions. Select an item then press to display the submenu. 3.9.1 ASUS EZ Flash 3 Utility This item allows you to run ASUS EZ Flash 3. When you press , a confirmation message appears. Use the left/right arrow key to select between [Yes] or [No], then press to confirm your choice. Chapter 3 For more details, refer to section ASUS EZ Flash 3.
3.9.2 ASUS Secure Erase SSD speeds may lower over time as with any storage medium due to data processing. ASUS Secure Erase completely and safely cleans your SSD, restoring it to factory performance levels. To launch ASUS Secure Erase, click Tool > ASUS Secure Erase on the Advanced mode menu. Check the ASUS support site for a full list of SSDs tested with ASUS Secure Erase. The drive may become unstable if you run ASUS Secure Erase on an incompatible SSD.
3.9.3 ASUS User Profile This item allows you to store or load multiple BIOS setting profiles. Load Profile This item allows you to load the previous BIOS settings saved in the BIOS Flash. Key in the profile number that saved your BIOS settings, press , and then select Yes. • DO NOT shut down or reset the system while updating the BIOS to prevent the system boot failure! • We recommend that you update the BIOS file only coming from the same memory/ CPU configuration and BIOS version.
3.10 Exit menu The Exit menu items allow you to load the optimal default values for the BIOS items, and save or discard your changes to the BIOS items. You can access the EZ Mode from the Exit menu. Load Optimized Defaults This option allows you to load the default values for each of the parameters on the Setup menus. When you select this option or if you press , a confirmation window appears. Select OK to load the default values.
3.11 Updating BIOS The ASUS website publishes the latest BIOS versions to provide enhancements on system stability, compatibility,and performance. However, BIOS updating is potentially risky. If there is no problem using the current version of BIOS, DO NOT manually update the BIOS. Inappropriate BIOS updating may result to system’s failure to boot. Carefully follow the instructions in this chapter to update your BIOS when necessary. Visit http://www.asus.
3.11.2 ASUS EZ Flash 3 ASUS EZ Flash 3 allows you to download and update to the latest BIOS through the Internet without having to use a bootable floppy disk or an OS‑based utility. Updating through the Internet varies per region and Internet conditions. Check your local Internet connection before updating through the Internet. To update the BIOS by USB: Chapter 3 3-26 1. Enter the Advanced Mode of the BIOS setup program. Go to the Tool menu to select ASUS EZ Flash Utility and press . 2.
• This function can support devices such as a USB flash disk with FAT 32/16 format and single partition only. • DO NOT shut down or reset the system while updating the BIOS to prevent system boot failure! Ensure to load the BIOS default settings to ensure system compatibility and stability. Select the Load Optimized Defaults item under the Exit menu. See section 3.10 Exit Menu for details. 1. Enter the Advanced Mode of the BIOS setup program.
3.11.3 ASUS CrashFree BIOS 3 The ASUS CrashFree BIOS 3 utility is an auto recovery tool that allows you to restore the BIOS file when it fails or gets corrupted during the updating process. You can restore a corrupted BIOS file using the motherboard support DVD or a USB flash drive that contains the BIOS file. The BIOS file in the motherboard support DVD may be older than the BIOS file published on the ASUS official website. If you want to use the newer BIOS file, download the file at https://www.asus.
Chapter 4: RAID Support RAID Support 4.1 AMD RAID Array configurations 4 The motherboard comes with the RaidXpert2 Configuration Utility that supports Volume, RAIDABLE, RAID 0, RAID 1, and RAID 10 (depends on system licensing) configurations. For more information on configuring your RAID sets, please refer to the RAID Configuration Guide which you can find at https://www.asus.com/support. 4.1.
Chapter 4 4-2 Chapter 4: RAID Support
Appendix Appendix Appendix Notices FCC Compliance Information Responsible Party: Asus Computer International Address: 48720 Kato Rd., Fremont, CA 94538, USA Phone / Fax No: (510)739-3777 / (510)608-4555 Identification of the assembled product: INTEL® WI-FI 6 AX200 Identification of the modular components used in the assembly: Model Name: INTEL® WI-FI 6 AX200 FCC ID: PD9AX200NG This device complies with part 15 of the FCC Rules.
Compliance Statement of Innovation, Science and Economic Development Canada (ISED) Appendix This device complies with Innovation, Science and Economic Development Canada licence exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device.
REACH Appendix Complying with the REACH (Registration, Evaluation, Authorisation, and Restriction of Chemicals) regulatory framework, we published the chemical substances in our products at ASUS REACH website at http://csr.asus.com/english/REACH.htm. DO NOT throw the motherboard in municipal waste. This product has been designed to enable proper reuse of parts and recycling.
NCC: Taiwan Wireless Statement Appendix 經型式認證合格之低功率射頻電機，非經許可，公司、商號或使用者均不得擅自變更頻 率、加大功率或變更原設計之特性及功能。低功率射頻電機之使用不得影響飛航安全及 干擾合法通信；經發現有干擾現象時，應立即停用，並改善至無干擾時方得繼續使用。 前項合法通信，指依電信法規定作業之無線電通信。低功率射頻電機須忍受合法通信或 工業、科學及醫療用電波輻射性電機設備之干擾。 應避免影響附近雷達系統之操作。 Japan RF Equipment Statement 屋外での使用について 本製品は、5GHz帯域での通信に対応しています。電波法の定めにより5.2GHz、5.
ROG STRIX X570-I GAMING Forenklet EU-overensstemmelseserklæring ASUSTeK Computer Inc. erklærer hermed at denne enhed er i overensstemmelse med hovedkravene og øvrige relevante bestemmelser i direktivet 2014/53/EU. Hele EU-overensstemmelseserklæringen kan findes på https://www.asus.com/support/ Wi-Fi, der bruger 5150-5350 MHz skal begrænses til indendørs brug i lande, der er anført i tabellen: Vereenvoudigd EU-conformiteitsverklaring ASUSTeK Computer Inc.
Appendix Wi-Fi darbība 5150–5350 MHz ir jāierobežo lietošanai telpās valstīs, kuras norādītas tālāk. Supaprastinta ES atitikties deklaracija Šiame dokumente bendrovė „ASUSTek Computer Inc.“ pareiškia, kad šis prietaisas atitinka pagrindinius reikalavimus ir kitas susijusias Direktyvos 2014/53/ES nuostatas. Visas ES atitikties deklaracijos tekstas pateikiamas čia: https://www.asus.
ASUS contact information ASUSTeK COMPUTER INC. Technical Support Telephone Fax Online support 4F, No. 150, Li-Te Road, Peitou, Taipei 112, Taiwan +886-2-2894-3447 +886-2-2890-7798 www.asus.com Appendix Address Telephone Fax Web site +86-21-38429911 +86-21-5866-8722, ext. 9101# http://qr.asus.com/techserv ASUS COMPUTER INTERNATIONAL (America) Address 48720 Kato Rd., Fremont, CA 94538, USA Telephone +1-510-739-3777 Fax +1-510-608-4555 Web site http://www.asus.
Appendix A-8 Appendix
