User Manual
ROG STRIX X299-E GAMING BIOS Manual
55
The following items appear only when you set M.2 Fan Profile to [Manual].
M.2 Fan Upper Temperature
Use the <+> or <-> keys to adjust the upper limit of the M.2 Fan
temperature. The M.2 Fan will operate at the maximum duty cycle when the
temperature source is higher than the limit.
M.2 Fan Max. Duty Cycle (%)
Use the <+> or <-> keys to adjust the maximum M.2 Fan duty cycle. When
the temperature source reaches the upper limit, the M.2 Fan will operate at
the maximum duty cycle.
M.2 Fan Middle Temperature
Use the <+> or <-> keys to adjust the middle limit of the M.2 Fan
temperature.
M.2 Fan Middle. Duty Cycle (%)
Use the <+> or <-> keys to adjust the M.2 Fan middle duty cycle.
M.2 Fan Lower Temperature
Use the <+> or <-> keys to adjust the lower limit of the M.2 Fan
temperature. The M.2 Fan will operate at the minimum duty cycle when the
temperature source is lower than the limit.
M.2 Fan Min. Duty Cycle(%)
Use the <+> or <-> keys to adjust the minimum M.2 Fan duty cycle. When
the temperature source is under the limit, the M.2 Fan will operate at the
minimum duty cycle.
M.2 fan Allow Fan Stop
This item allows your fans to run at 0% duty cycle when the temperature of
the source drops below the lower temperature.
Conguration options: [Disabled] [Enabled]
Ext. Fan(s) Configuration
An ASUS FAN EXTENSION CARD is required to congure these items.
Extension Fan 1-3 Q-Fan Control
[Disabled] Disable the Extension Fan Q-Fan control feature.
[DC mode] Enable the Extension Fan Q-Fan control in DC mode for 3-pin
extension fan.
[PWM mode] Enable the Extension Fan Q-Fan control in PWM mode for 4-pin
extension fan.