User Manual

22
ROG STRIX X299-E GAMING BIOS Manual
TPU
This item allows you to automatically overclock the CPU and DRAM frequencies and voltage
for an enhanced system performance.
[Keep Current Settings] Keep the current settings without changing anything.
[TPU I] Applies air cooling overclocking conditions.
[TPU II] Applies water cooling overclocking conditions.
Ensure to use water cooling device before selecting [TPU II].
CPU SVID Support
Disable this item to stop the CPU from communicating with the external voltage regulator.
Conguration options: [Auto] [Disabled] [Enabled]
DRAM Timing Control
The sub-items in this menu allow you to set the DRAM timing control features. Use the
<+> and <-> keys to adjust the value. To restore the default setting, type [auto] using the
keyboard and press the <Enter> key.
Changing the values in this menu may cause the system to become unstable! If this
happens, revert to the default settings.
Primary Timings
DRAM CAS# Latency
Conguration options: [Auto] [1] – [31]
DRAM RAS# to CAS# Delay
Conguration options: [Auto] [1] – [31]
DRAM RAS# ACT Time
Conguration options: [Auto] [1] – [63]
DRAM Command Rate
Conguration options: [Auto] [1N] [2N] [3N] [N:1]
Secondary Timings
DRAM RAS# to RAS# Delay L
Conguration options: [Auto] [1] – [15]
DRAM RAS# to RAS# Delay S
Conguration options: [Auto] [1] – [15]
DRAM REF Cycle Time
Conguration options: [Auto] [1] – [1023]
DRAM Refresh Interval
Conguration options: [Auto] [1] – [65535]
DRAM WRITE Recovery Time
Conguration options: [Auto] [1] – [31]