BIOS Manual Motherboard ROG STRIX X299-E GAMING
E12818 First Edition August 2017 Copyright© 2017 ASUSTeK COMPUTER INC. All Rights Reserved. No part of this manual, including the products and software described in it, may be reproduced, transmitted, transcribed, stored in a retrieval system, or translated into any language in any form or by any means, except documentation kept by the purchaser for backup purposes, without the express written permission of ASUSTeK COMPUTER INC. (“ASUS”).
Contents 1.1 Knowing BIOS................................................................................................ 4 1.2 BIOS setup program...................................................................................... 5 1.2.1 Advanced Mode.............................................................................. 6 1.2.2 EZ Mode......................................................................................... 9 1.2.3 QFan Control..............................................
BIOS Setup 1.1 Knowing BIOS The new ASUS UEFI BIOS is a Unified Extensible Interface that complies with UEFI architecture, offering a user-friendly interface that goes beyond the traditional keyboardonly BIOS controls to enable a more flexible and convenient mouse input. You can easily navigate the new UEFI BIOS with the same smoothness as your operating system. The term “BIOS” in this user manual refers to “UEFI BIOS” unless otherwise specified.
1.2 BIOS setup program Use the BIOS Setup to update the BIOS or configure its parameters. The BIOS screen include navigation keys and brief onscreen help to guide you in using the BIOS Setup program. Entering BIOS at startup To enter BIOS Setup at startup, press or during the Power-On Self Test (POST). If you do not press or , POST continues with its routines. Entering BIOS Setup after POST To enter BIOS Setup after POST: • Press ++ simultaneously.
1.2.1 Advanced Mode The Advanced Mode provides advanced options for experienced end-users to configure the BIOS settings. The figure below shows an example of the Advanced Mode. Refer to the following sections for the detailed configurations. The default screen for entering the BIOS setup program can be changed. Refer to the Setup Mode item in section Boot menu for details.
Menu bar The menu bar on top of the screen has the following main items: My Favorites For saving the frequently-used system settings and configuration. Main For changing the basic system configuration Ai Tweaker For changing the overclocking settings Advanced For changing the advanced system settings Monitor For displaying the system temperature, power status, and changing the fan settings.
Search on FAQ Move your mouse over this button to show a QR code, scan this QR code on your mobile device to connect to the BIOS FAQ web page of the ASUS support website. You can also scan the following QR code: Hot keys This button above the menu bar contains the navigation keys for the BIOS setup program. Use the navigation keys to select items in the menu and change the settings. Scroll bar A scroll bar appears on the right side of a menu screen when there are items that do not fit on the screen.
1.2.2 EZ Mode The EZ Mode provides you an overview of the basic system information, and allows you to select the display language, system performance, mode and boot device priority. To access the Advanced Mode, select Advanced Mode or press the hotkey for the advanced BIOS settings. To switch from Advanced Mode to EZ Mode, click EZ Mode(F7) or press the hotkey. Displays the system properties of the selected mode.
1.2.3 QFan Control The QFan Control allows you to set a fan profile or manually configure the operating speed of your CPU and chassis fans.
Configuring fans manually Select Manual from the list of profiles to manually configure your fans’ operating speed. Speed points Select to manually configure your fans To configure your fans: 1. Select the fan that you want to configure and to view its current status. 2. Click and drag the speed points to adjust the fans’ operating speed. 3. Click Apply to save the changes then click Exit (ESC).
1.2.4 EZ Tuning Wizard EZ Tuning Wizard allows you to easily overclock your CPU and DRAM, computer usage, and CPU fan to their best settings. You can also set RAID in your system using this feature. OC setup RAID setup OC Tuning To start OC Tuning: 12 1. Press on your keyboard or click EZ Tuning Wizard screen. 2. Click OC then click Next. 3. Select a PC scenario Daily Computing or Gaming/Media Editing, then click Next.
4. Select a Main Cooling System Box cooler, Tower cooler, Water cooler, or I’m not sure, then click Next. 5. After selecting the Main Cooling System, click Next then click Yes to start the OC Tuning. Creating RAID To create RAID: 1. Press on your keyboard or click EZ Tuning Wizard screen. 2. Click RAID then click Next. 3. from the BIOS screen to open • Ensure that your HDDs have no existing RAID volumes. • Ensure to connect your HDDs to Intel® SATA connectors.
4. Check the available storage disk drives, then click Next. 5. Select the type of storage for your RAID, Easy Backup or Super Speed, then click Next. a. For Easy Backup, click Next then select from Easy Backup (RAID 1) or Easy Backup (RAID 10). You can only select Easy Backup (RAID 10) if you connect four (4) HDDs.
b. For Super Speed, click Next then select from Super Speed (RAID 0) or Super Speed (RAID 5). 6. After selecting the type of RAID, click Next then click Yes to continue the RAID setup. 7. After the RAID setup is done, click Yes to exit the setup then click OK to reset your system. 1.3 My Favorites My Favorites is your personal space where you can easily save and access your favorite BIOS items. My Favorites comes with several performance, power saving, and fast boot related items by default.
Adding items to My Favorites To add BIOS items: 1. Press on your keyboard or click MyFavorites(F3) from the BIOS screen to open Setup Tree Map screen. 2. On the Setup Tree Map screen, select the BIOS items that you want to save in My Favorites screen. Main menu panel Selected shortcut items Submenu panel Delete all favorite items Recover to default favorite items 3. Select an item from main menu panel, then click the submenu that you want to save as or press on your keyboard.
1.4 Main menu The Main menu screen appears when you enter the Advanced Mode of the BIOS Setup program. The Main menu provides you an overview of the basic system information, and allows you to set the system date, time, language, and security settings. Security The Security menu items allow you to change the system security settings. • If you have forgotten your BIOS password, erase the CMOS Real Time Clock (RTC) RAM to clear the BIOS password. See section 1.1.
Administrator Password If you have set an administrator password, we recommend that you enter the administrator password for accessing the system. Otherwise, you might be able to see or change only selected fields in the BIOS setup program. To set an administrator password: 1. Select the Administrator Password item and press . 2. From the Create New Password box, key in a password, then press . 3. Re-type to confirm the password then select OK. To change an administrator password: 1.
1.5 Ai Tweaker menu The Ai Tweaker menu items allow you to configure overclocking-related items. Be cautious when changing the settings of the Ai Tweaker menu items. Incorrect field values can cause the system to malfunction. The configuration options for this section vary depending on the CPU and DIMM model you installed on the motherboard. Scroll down to display other BIOS items.
When the Ai Overclock Tuner is set to [XMP], the following item appear. XMP This item allows you to select your eXtreme Memory Profile (XMP). Each profile has its own DRAM frequency, timing and voltage. When the Ai Overclock Tuner is set to [Manual] or [XMP], the following items appear. BCLK Frequency This item allows you to set the BCLK (base clock) frequency to enhance the system performance. Use the <+> or <-> to adjust the value. The values range from 80.0 MHz to 1000.0 MHz.
When the CPU Core Ratio is set to [By Core Usage], the following items appears. 2-Core Ratio Limit Enter [Auto] to apply the CPU default Turbo Ratio setting or manually assign a 2-core ratio limit that must be higher than or equal to the 3-core ratio limit. If you assign a value for 2-Core Ratio Limit, do not set the 1-Core Ratio Limit to [Auto].
TPU This item allows you to automatically overclock the CPU and DRAM frequencies and voltage for an enhanced system performance. [Keep Current Settings] Keep the current settings without changing anything. [TPU I] Applies air cooling overclocking conditions. [TPU II] Applies water cooling overclocking conditions. Ensure to use water cooling device before selecting [TPU II]. CPU SVID Support Disable this item to stop the CPU from communicating with the external voltage regulator.
DRAM READ to PRE Time Configuration options: [Auto] [1] – [15] DRAM FOUR ACT WIN Time Configuration options: [Auto] [1] – [63] DRAM WRITE to READ Delay Configuration options: [Auto] [1] – [15] DRAM WRITE to READ Delay L Configuration options: [Auto] [1] – [15] DRAM WRITE to READ Delay S Configuration options: [Auto] [1] – [15] DRAM CKE Minimum Pulse Width Configuration options: [Auto] [0] – [15] DRAM Write Latency Configuration options: [Auto] [1] – [31] Skew Control ODT RTT WR (CHC) Configuration options:
ODT_READ_DURATION Configuration options: [Auto] [0] - [7] ODT_READ_DELAY Configuration options: [Auto] [0] - [7] ODT_WRITE_DURATION Configuration options: [Auto] [0] - [7] ODT_WRITE_DELAY Configuration options: [Auto] [0] - [7] Data Rising Slope Configuration options: [Auto] [0] - [15] Data Rising Slope Offset Configuration options: [Auto] [0] - [1] Cmd Rising Slope Configuration options: [Auto] [0] - [15] Cmd Rising Slope Offset Configuration options: [Auto] [0] - [1] Ctl Rising Slope Configuration options
RTL IOL Control DRAM RTL INIT Value Configuration options: [Auto] [0] - [127] DRAM RTL (CHC DIMM0 Rank0) Configuration options: [Auto] [0] - [127] DRAM RTL (CHC DIMM0 Rank1) Configuration options: [Auto] [0] - [127] DRAM RTL (CHC DIMM1 Rank0) Configuration options: [Auto] [0] - [127] DRAM RTL (CHC DIMM1 Rank1) Configuration options: [Auto] [0] - [127] DRAM RTL (CHD DIMM0 Rank0) Configuration options: [Auto] [0] - [127] DRAM RTL (CHD DIMM0 Rank1) Configuration options: [Auto] [0] - [127] DRAM RTL (CHD DIMM1
IO Latency offset CHC IO_Latency_offset Configuration options: [Auto] [0] - [127] CHD IO_Latency_offset Configuration options: [Auto] [0] - [127] IO Latency RFR delay CHC RFR delay Configuration options: [Auto] [0] - [127] CHD RFR delay Configuration options: [Auto] [0] - [127] Third Timings tRDRD_sg Configuration options: [Auto] [0] - [63] tRDRD_dg Configuration options: [Auto] [0] - [63] tRDWR_sg Configuration options: [Auto] [0] - [63] tRDWR_dg Configuration options: [Auto] [0] - [63] tWRWR_sg Configurat
tWRWR_dd Configuration options: [Auto] [0] - [63] tWRRD_dr Configuration options: [Auto] [0] - [63] tWRRD_dd Configuration options: [Auto] [0] - [63] TWRPRE Configuration options: [Auto] [0] - [127] TRDPRE Configuration options: [Auto] [0] - [15] tREFIX9 Configuration options: [Auto] [0] - [127] OREF_RI Configuration options: [Auto] [0] – [255] Misc. MRC Fast Boot Allows you to enable, disable or automatically set the MRC fast boot.
External Digi+ Power Control CPU Load-line Calibration Load-line is defined by Intel® specification and affects CPU power voltage. The CPU working voltage decreases proportionally to CPU loading. Higher load-line calibration could get higher voltage and good overclocking performance, but increases the CPU and VRM thermal conditions. Select from levels 1 to 7 to adjust the load-line slope.
The following item appears only when the CPU VRM Switching Frequency is set to [Auto]. VRM Spread Spectrum This item allows to enhance the system stability. Configuration options: [Auto] [Disabled] [Enabled] CPU Power Phase Control This item allows you to set the power phase control of the CPU. [Auto] Automatically set the phase control mode. [Standard] The phase control will be based on the CPU command. [Optimized] Set to the ASUS optimized phase tuning profile. [Extreme] Set to the full phase mode.
Internal CPU Power Management The subitems in this menu allow you to set the CPU ratio and features. Intel(R) SpeedStep(tm) Allows the operating system to dynamically adjust the processor voltage and cores frequency to decrease the average power consumption and decrease average heat production. Configuration options: [Auto] [Enabled] [Disabled] Turbo Mode Allows you to enable your processor cores to run faster than the base operating frequency when it is below power, current and specification limit.
CPU Internal Power Configuration CPU Integrated VR Efficiency Management [Auto] Set to default mode [High Performance] Allow the FIVR (fully integrated voltage regulator) to work at high performance at all times. [Balanced] Improve power saving when the CPU is in a low power state. IA AC Load Line This item allows you to set the AC loadline defined in 1/100 mOhms. Use the <+> and <-> keys to adjust the value. Configuration options: [Auto] [0.01] - [62.
Initial PCIE Frequency Configuration options: [Auto] [80] - [200] PCIE/DMI Amplitude This item allows you to set the signal magnitude of the reference PCIE/DMI CLK supplied to the processor. Higher values may improve overclocking stability.
CPU Core/Cache Current Limit Max. This item allows you to configure a higher current limit to prevent a frequency or power throttling when overclocking. Use the <+> and <-> keys to adjust the value. Configuration options: [Auto] [0.00] - [255.50] Min. CPU Cache Ratio This item allows you to set the minimum possible CPU cache ratio. Use the <+> and <-> keys to adjust the value. Configuration options: [Auto] [8] - [26] Max. CPU Cache Ratio This item allows you to set the maximum possible CPU cache ratio.
CPU Core Voltage Offset This item allows you to configure the CPU core voltage offset value. Configuration options: [Auto] [-0.635] - [+0.635] The following items appear only when you set the CPU Core/Cache Voltage to [Adaptive Mode]. Offset Mode Sign [+] To offset the voltage by a positive value. [–] To offset the voltage by a negative value. Additional Turbo Mode CPU Core Voltage This item allows you to configure the CPU core voltage offset value. Configuration options: [Auto] [0.250] - [1.
DRAM DATA REF Voltage on CHC DIMM1 Rank0 BL0-7 Configures the DRAM Data REF Voltage. Configuration options: [Auto] [0] - [63] DRAM DATA REF Voltage on CHC DIMM1 Rank1 BL0-7 Configures the DRAM Data REF Voltage. Configuration options: [Auto] [0] - [63] DRAM DATA REF Voltage on CHD DIMM0 Rank0 BL0-7 Configures the DRAM Data REF Voltage. Configuration options: [Auto] [0] - [63] DRAM DATA REF Voltage on CHD DIMM0 Rank1 BL0-7 Configures the DRAM Data REF Voltage.
1.6 Advanced menu The Advanced menu items allow you to change the settings for the CPU and other system devices. Be cautious when changing the settings of the Advanced menu items. Incorrect field values can cause the system to malfunction.
1.6.1 CPU Configuration The items in this menu show the CPU-related information that the BIOS automatically detects. The items in this menu may vary based on the CPU installed. Hyper-Threading This item allows you to enable or disable the Hyper-Threading for logical processor threads. Configuration options: [Enabled] [Disabled] Thermal Monitor This item allows you to enable or disable the Thermal Monitor.
Adjacent Cache Line Prefetch This item allows the mid level cache (L2) to prefetch adjacent cache lines, reducing the DRAM loading time and improves the system performance. Configuration options: [Disabled] [Enabled] Boot performance mode This item allows you to select the CPU performance state during system boot before the operating system takes control. The CPU runs at a selected performance ratio based on CPU configuration.
CPU C6 Report This item allows you to disable or enable the CPU C6 report to the operating system. Configuration options: [Enabled] [Disabled] CPU C7 Report This item allows you to disable or enable the CPU C7 report to the operating system. Configuration options: [CPU C7] [CPU C7s] [Disabled] CPU C8 Report This item allows you to disable or enable the CPU C8 report to the operating system.
The following item appears only when you set the PCI Express Native Power Management to [Enabled]. Native ASPM Configuration options: [Auto] [Enabled] [Disabled] PCH - PCI Express PCH DMI ASPM This item allows you to control the Active State Power Management on both NB (NorthBridge) side and SB (SouthBridge) side of the DMI Link. Configuration options: [Disabled] [Enabled] ASPM This item allows you to select the ASPM state for energy-saving conditions.
DMI/OPI Configuration This item allows you to control various DMI (direct media interface) functions. DMI Max Link Speed This item allows you to set DMI speed. Configuration options: [Auto] [Gen1] [Gen2] [Gen3] PEG Port Configuration This item allows you to configure the PEG Port settings. PCIEX16_1 Link Speed This item allows you to configure the PCIEx16_1 slot. Configuration options: [Auto] [Gen1] [Gen2] [Gen3] PCIEX16_2 Link Speed This item allows you to configure the PCIEx16_2 slot.
1.6.5 PCH Storage Configuration While entering Setup, the BIOS automatically detects the presence of SATA devices. The SATA Port items show Empty if no SATA device is installed to the corresponding SATA port. Scroll down to display the other BIOS items. SATA Controller(s) This item allows you to enable or disable the SATA Device. Configuration options: [Disabled] [Enabled] The following item appears only when you set the SATA Controller(s) to [Enabled].
Aggressive LPM support This item is designed for LPM (link power management) support with a better energy saving conditions. When disabled, the hot plug function of SATA ports are disabled. Configuration options: [Disabled] [Enabled] SATA6G_1 - SATA6G_8 SATA6G_1 - SATA6G_8 This item allows you to enable or disable the selected SATA port.
PCIEX1_2 and PCIEX8/X1_3 Switch Function [Auto Mode] If a device is detected in PCIEX8/X1_3, PCIEX8/X1_3 will be enabled and PCIEX1_2 will be disabled. [PCIEX1_2] Enable PCIEX1_2 and disable PCIEX8/X1_3. U31G2_E3 & PCIEX1_1 Switch Function [Auto Mode] If a device is detected in PCIEX1_1, PCIEX1_1 will be enabled and U31G2_E3 will be disabled. [U31G2_E3] Enable U31G2_E3 and disable PCIEX1_1.
Bluetooth Controller This item allows you to enable or disable the Bluetooth Controller. Configuration options: [Disabled] [Enabled] Intel LAN Controller This item allows you to enable or disable the Intel(R) LAN controller. Configuration options: [Disabled] [Enabled] The following item appears only when you set the Intel LAN Controller to [Enabled]. Intel LAN PXE Option ROM This item allows you to enable or disable the PXE Option Rom of the Intel LAN controller.
1.6.7 APM Configuration ErP Ready This item allows you to switch off some power at S4+S5 or S5 to get the system ready for ErP requirement. When set to [Enabled], all other PME options are switched off. Configuration options: [Disabled] [Enabled (S4+S5)] [Enabled (S5)] Restore AC Power Loss This item allows your system to go to ON state, OFF state, or both states after an AC power loss. When setting your system to [Last State], it goes to the previous state before the AC power loss.
1.6.8 Network Stack Configuration Network stack This item allows you to disable or enable the UEFI network stack. Configuration options: [Disable] [Enable] The following item appears only when you set the Network Stack to [Enabled]. Ipv4/Ipv6 PXE Support This item allows you to enable or disable the Ipv4/Ipv6 PXE wake event. Configuration options: [Disabled] [Enabled] 1.6.9 HDD/SSD SMART Information This menu displays the SMART information of the connected devices.
1.6.10 USB Configuration The items in this menu allow you to change the USB-related features. The Mass Storage Devices item shows the auto-detected values. If no USB device is detected, the item shows None. Legacy USB Support [Enabled] Your system supports the USB devices in legacy operating systems. [Disabled] Your USB devices can be used for BIOS setup only and cannot be recognized in the boot devices list. [Auto] Your system automatically detects the presence of USB devices at startup.
1.6.11 PCH-FW Configuration This item allows you to configure the firmware TPM. PTT Configuration PTT [Enabled] [Disabled] Enables PTT in SkuMgr. Disables PTT in SkuMgr. PTP aware OS This item allows you to select whether or not the OS will be PTP aware. Configuration options: [PTP aware] [Not PTP aware] 1.6.12 Intel(R) Rapid Storage Technology Allows you to configure the view the RAID volumes and VMD controllers on the system.
1.7 Monitor menu The Monitor menu displays the system temperature/power status, and allows you to change the fan settings. Scroll down to display the other BIOS items. CPU Temperature, Motherboard Temperature, VRM temperature, PCH temperature, T_Sensor Temperature, EXT_Sensor1-3 Temperature [xxx°C/xxx°F] The onboard hardware monitor automatically detects and displays the CPU, motherboard, VRM, PCH, T_Sensor, and EXT_Sensor1-3 temperatures.
Q-fan Configuration Q-fan Tuning Click this item to automatically detect the lowest speed and configure the minimum duty cycle for each fan. CPU Q-Fan Control This item allows you to set the CPU Q-Fan operating mode. [Auto] Detects the type of CPU fan installed and automatically switches the control modes. [PWM Mode] Enables the CPU Q-Fan Control feature in PWM mode for 4-pin CPU fan. [DC Mode] Enables the CPU Q-Fan Control feature in DC mode for 3-pin CPU fan. [Disabled] Disables the Q-Fan Control.
CPU Fan Max. Duty Cycle(%) Use the <+> and <-> keys to adjust the maximum CPU fan duty cycle. When the CPU temperature reaches the upper limit, the CPU fan will operate at the maximum duty cycle. CPU Middle Temperature Use the <+> and <-> keys to adjust the CPU middle temperature. CPU Fan Middle Duty Cycle(%) Use the <+> or <-> keys to adjust the CPU fan middle duty cycle. CPU Lower Temperature Use the <+> or <-> keys to adjust the lower limit of the CPU temperature.
Chassis Fan 1-2 Step Down This item allows you to set the value of the chassis fan step down. Configuration options: [0 sec] [12 sec] [25 sec] [51 sec] [76 sec] [102 sec] [127 sec] [153 sec] [178 sec] [204 sec] Chassis Fan 1-2 Fan Speed Low Limit This item allows you to disable or set the chassis fan warning speed. Configuration options: [Ignore] [200 RPM] [300 RPM] [400 RPM] [500 RPM] [600 RPM] Chassis Fan 1-2 Profile This item allows you to set the appropriate performance level of the chassis fan.
M.2 Fan Control This item allows you to set the M.2 Fan operating mode. [Auto] Detects the type of M.2 Fan installed and automatically switches the control modes. [PWM Mode] Enables the M.2 Fan Control feature in PWM mode for 4-pin M.2 Fan. [DC Mode] Enables the M.2 Fan Control feature in DC mode for 3-pin M.2 Fan. [Disabled] Disables the M.2 Fan Control. M.2 Fan Q-Fan Source The assigned fan will be controlled according to the selected temperature source.
The following items appear only when you set M.2 Fan Profile to [Manual]. M.2 Fan Upper Temperature Use the <+> or <-> keys to adjust the upper limit of the M.2 Fan temperature. The M.2 Fan will operate at the maximum duty cycle when the temperature source is higher than the limit. M.2 Fan Max. Duty Cycle (%) Use the <+> or <-> keys to adjust the maximum M.2 Fan duty cycle. When the temperature source reaches the upper limit, the M.2 Fan will operate at the maximum duty cycle. M.
Extension Fan 1-3 Q-Fan Source The assigned fan will be controlled according to the selected temperature source. Configuration options: [CPU] [MotherBoard] [VRM] [PCH] [T_SENSOR] [EXT_Sensor1] [EXT_Sensor2] [EXT_Sensor3] [Multiple Sources] • For EXT_Sensor1-3, connect a Thermistor cable to one of these connectors, then tape the other end on a critical component to control its temperature.
Extension Fan 1-3 Allow Fan Stop This item allows your fans to run at 0% duty cycle when the temperature of the source drops below the lower temperature. Configuration options: [Disabled] [Enabled] Water_Pump+/AIO Pump Control [Disabled] Disable the Water_Pump+/AIO Pump control feature. [Auto] Detects the type of Water_Pump+/AIO Pump installed and automatically switches the control modes. [DC mode] Enable the Water_Pump+/AIO Pump control in DC mode for 3-pin chassis fan.
1.8 Boot menu The Boot menu items allow you to change the system boot options. Fast Boot [Disabled] Allows your system to go back to its normal boot speed. [Enabled] Allows your system to accelerate the boot speed. The following items appear only when you set the Fast Boot to [Enabled]. Next Boot after AC Power Loss [Normal Boot] Returns to normal boot on the next boot after an AC power loss. [Fast Boot] Accelerates the boot speed on the next boot after an AC power loss.
The following item appears only when you set the Boot Logo Display to [Auto] and [Full Screen]. Post Delay Time This item allows you to select a desired additional POST waiting time to easily enter the BIOS Setup. You can only execute the POST delay time during normal boot. Configuration options: [0 sec] - [10 sec] This feature only works when set under normal boot. The following item appears only when you set the Boot Logo Display to [Disabled].
CSM (Compatibility Support Module) This item allows you to configure the CSM (Compatibility Support Module) items to fully support the various VGA, bootable devices and add-on devices for better compatibility. Launch CSM [Auto] The system automatically detects the bootable devices and the addon devices. [Enabled] For better compatibility, enable the CSM to fully support the non-UEFI driver add-on devices or the Windows® UEFI mode.
Clear Secure Boot keys This item appears only when you load the default Secure Boot keys. This item allows you to clear all default Secure Boot keys. Key Management Install Default Secure Boot keys This item allows you to immediately load the default Security Boot keys, Platform key (PK), Key-exchange Key (KEK), Signature database (db), and Revoked Signatures (dbx). When the default Secure boot keys are loaded, the PK state will change from Unloaded mode to loaded mode.
Delete key This item allows you to delete the KEK from your system. Configuration options: [Yes] [No] The KEK file must be formatted as a UEFI variable structure with time-based authenticated variable. Authorized Signatures The Authorized Signatures (db) lists the signers or images of UEFI applications, operating system loaders, and UEFI drivers that you can load on the single computer. Save to file This item allows you to save the db to a USB storage device.
Boot Option Priorities These items specify the boot device priority sequence from the available devices. The number of device items that appears on the screen depends on the number of devices installed in the system. • To access Windows® OS in Safe Mode, press after POST (Windows® 8 not supported). • To select the boot device during system startup, press when ASUS Logo appears. Boot Override These item displays the available devices.
1.9.2 Secure Erase SSD speeds may lower over time as with any storage medium due to data processing. Secure Erase completely and safely cleans your SSD, restoring it to factory performance levels. Secure Erase is only available in AHCI mode. Ensure to set the SATA mode to AHCI. Click Advanced > PCH Storage Configuration > SATA Mode Selection > AHCI. To launch Secure Erase, click Tool > Secure Erase on the Advanced mode menu.
1.9.3 ASUS Overclocking Profile This item allows you to store or load multiple BIOS settings. Load from Profile This item allows you to load the previous BIOS settings saved in the BIOS Flash. Key in the profile number that saved your BIOS settings, press , and then select Yes. • DO NOT shut down or reset the system while updating the BIOS to prevent the system boot failure! • We recommend that you update the BIOS file only coming from the same memory/ CPU configuration and BIOS version.
1.9.4 ASUS SPD Information This item allows you to view the DRAM SPD information. 1.9.5 Graphics Card Information This item displays the information and recommended configuration for the PCIE slots that the graphics card is installed in your system. This feature is only supported on selected ASUS graphics cards. GPU Post This item displays the information and recommended configuration for the PCIE slots that the graphics card is installed in your system.
1.10 Exit menu The Exit menu items allow you to load the optimal default values for the BIOS items, and save or discard your changes to the BIOS items. You can access the EZ Mode from the Exit menu. Load Optimized Defaults This option allows you to load the default values for each of the parameters on the Setup menus. When you select this option or if you press , a confirmation window appears. Select OK to load the default values.
1.11 Updating BIOS The ASUS website publishes the latest BIOS versions to provide enhancements on system stability, compatibility,and performance. However, BIOS updating is potentially risky. If there is no problem using the current version of BIOS, DO NOT manually update the BIOS. Inappropriate BIOS updating may result to system’s failure to boot. Carefully follow the instructions in this chapter to update your BIOS when necessary. Visit http://www.asus.
1.11.2 ASUS EZ Flash 3 ASUS EZ Flash 3 allows you to download and update to the latest BIOS through the Internet without having to use a bootable floppy disk or an OS‑based utility. Updating through the Internet varies per region and Internet conditions. Check your local Internet connection before updating through the Internet. To update the BIOS by USB: 1. Enter the Advanced Mode of the BIOS setup program. Go to the Tool menu to select ASUS EZ Flash 3 Utility and press . 2.
• This function can support devices such as a USB flash disk with FAT 32/16 format and single partition only. • DO NOT shut down or reset the system while updating the BIOS to prevent system boot failure! Ensure to load the BIOS default settings to ensure system compatibility and stability. Select the Load Optimized Defaults item under the Exit menu. See section 1.10 Exit Menu for details. To update the BIOS by Internet: 1. Enter the Advanced Mode of the BIOS setup program.
1.11.3 ASUS CrashFree BIOS 3 The ASUS CrashFree BIOS 3 utility is an auto recovery tool that allows you to restore the BIOS file when it fails or gets corrupted during the updating process. You can restore a corrupted BIOS file using the motherboard support DVD or a USB flash drive that contains the BIOS file. The BIOS file in the motherboard support DVD may be older than the BIOS file published on the ASUS official website. If you want to use the newer BIOS file, download the file at https://www.asus.
ROG STRIX X299-E GAMING BIOS Manual
