User Manual
Table Of Contents
- 1. Knowing BIOS
- 2. BIOS setup program
- 3. My Favorites
- 4. Main menu
- 5. Ai Tweaker menu
- 6. Advanced menu
- 6.1 Trusted Computing
- 6.2 AMD fTPM configuration
- 6.3 CPU Configuration
- 6.4 ROG Effects
- 6.5 SATA Configuration
- 6.6 Onboard Devices Configuration
- 6.7 APM Configuration
- 6.8 PCI Subsystem Settings
- 6.9 USB Configuration
- 6.10 Network Stack Configuration
- 6.11 HDD/SSD SMART Information
- 6.12 AMD Overclocking
- 6.13 AMD CBS
- 7. Monitor menu
- 8. Boot menu
- 9. Tool menu
- 10. Exit menu
- 11. Updating BIOS
66
ROG STRIX B450-F GAMING II BIOS Manual
7. Monitor menu
The Monitor menu displays the system temperature/power status, and allows you to change
the fan settings.
Scroll down to display the other BIOS items.
CPU Temperature, MotherBoard Temperature, PCH Temperature, T_Sensor
Temperature [xxx°C/xxx°F]
The onboard hardware monitor automatically detects and displays the CPU, motherboard,
PCH, and T-Sensor temperatures. Select [Ignore] if you do not wish to display the detected
temperatures.
CPU Fan Speed, CPU Optional Fan Speed, Chassis Fan Speed, AIO PUMP
Speed [xxxx RPM]
The onboard hardware monitor automatically detects and displays the CPU fan, CPU
optional fan, chassis fan, and AIO PUMP fan speed in rotations per minute (RPM). If the fan
is not connected to the motherboard, the field shows N/A. Select [Ignore] if you do not wish
to display the detected speed.
CPU Core Voltage, 3.3V Voltage, 5V Voltage, 12V Voltage [x.xxxx V]
The onboard hardware monitor automatically detects the voltage output through the onboard
voltage regulators. Select [Ignore] if you do not want to detect this item.
Q-fan Configuration
Q-fan Tuning
Click this item to automatically detect the lowest speed and configure the minimum
duty cycle for each fan.